Search results

I really hate to do this but I need to move this Ty. It's 95% finished. I've been working on it in my garage off/on for the past 2 years. And it was sitting for 5 years before I bought it. Would like $6500 out of it but we will see what happens. Anyway here's the info. Will get the pics up...

I have my FP set at 40. When it's running, the gauge "flutters" from 43 to 35. It seems like every time the injectors fire, that's when it goes off and the needle stays pretty much at the right pressure, just it bounces around, really fast. I mean the needle pretty much stays in the same place...

Ok, here's the problem...The Ty sometimes will start and run fine, but if I kill it and try and restart it nothing will come on, FP, intercooler pump, even lights wont work, the whole truck is dead. The key cylinder seems ok, but that wouldn't even matter with the head lights. I can keep...

Saw it on 114 going west then it went on 121 south in Grapevine...Good looking truck..Anyone?

Messin around and found a title "Decommissioned Classics:Cool Cars We Miss" so I scrolled down and there they are. Pretty cool. They even spelled it right. Dont think it's a repost. http://autos.msn.com/advice/article.aspx?contentid=4025155

Here's a link I found with a SyTy motor being dynoed by them. http://www.nelsonracingengines.com/video_dyno.html Look for the T Dyno Pull: 4.3 ltr V6 ----Too bad they can't spell Syclone. Anybody know who the guy is at the end of the vid?

Going west bound on 114 thru Trophy Club about 2:30pm. Turned off and took 170 towards Keller. Looked real clean. Anyone?

I'm looking for the dimensions and location for a cutout so I can access/change the FP on the Ty without dropping the tank. Yes, I will make a removable cover plate. I saw a picture somewhere on here of what I want to do but can't find it now. Yeah, I know I'm being lazy but it's under the...

I did some searching and couldn't find my answer. Here's the deal. I have a stock turbo on the Ty right now w/ a 8cm exh housing, then I have a 20g with a 14 cm exhaust housing. My question is, can I take the 8cm exhaust housing off and put it on the 20g in place of the 14cm? The only reason...

On a trailer. :) Well it's been about 3 years without a Sy/Ty. Got a 93 White on White. It's been sitting for the past 5 years so it does need quite a bit of work but am actually looking forward to getting back into the Sy/Ty world. I know that may sound dumb but I've kinda missed it...

Ok, here's the situation. I have power on all fuses except the ECM1, as in no power on either side of the socket. I can use a jumper wire from the ECM B fuse and the truck will start up so there isn't any kind of short anywhere. BTW fuel pump isn't connected there anymore so I know there are...

I did a search on the McCord dumps and found that Michael H has one. Has anyone else had any experiance with this brand of cutout? Michael, if your out there, how's yours holding up? I know that there was a GP on some that were going to be $159 or so but the McCord is $105 + s/h. They also...

I need to know if the front hub assembly (hub & bearings & whatever) is the same as a regular s-15 4*4. I'm being relocated to Dallas on sunday and the dealership says its a specific part. Let alone that it costs like 400. I do have a friend there that will sell it to me for like 319 but if...

REAL LUCKY. Figured that topic would get your attention but it's not what your thinking. :D Anyway, the truck started making a funny noise today coming home. So I jack up the truck and start checking stuff. Grab the tire, holy crap that thing is wobbly :o . Somehow the main nut holding the...

I have never posted in this forum but just wanted to share. I was driving down the road in town and saw a Z coming up from behind so right when he got next to me I hit it and let off. Needless to say the race was on. Because of traffic we went around a couple of cars, at normal speed BTW...

First off, not mine and don't know who's it is, was just looking around for SyTy stuff. But I know how hard these things are to come by, so I thought I would post it here if anybody is interested. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2401029746&category=10368

Did a search and really couldn't find my exact problem. I started the truck up to go home and it wouldn't shift correctly. It takes about 3500 to 3700 rpm to get it to shift and that's just easing into the throttle and when it does shift IT SHIFTS HARD. I thought maybe it was just the cold...

Well, it appears that our job here is shuting down and transfering to Dallas. It'll be me and another guy here at work with a Ty. Anybody happen to work for SBC? Would have had 3 but the other guy here with a Sy is getting transfered to KC. Not that I mind moving but I would like for it to be...

Could someone send me a datamaster or diacom file of of a good running truck with the PTE setup. I need to stare and compare. Need to burn another chip but would like to see how others are running. Mine does pretty good on the mid-top end but the idle and low end reponse is kinda crappy...

Went to the track last night and was having trouble running any boost over 16 pounds (sputtering and spitin' all the way), then I came back to the pits and when I tried to restart it, NO GO. Trouble is a weak spark, we tested it visually at the coil wire and it was only orange in color and...