Search results

depending on how the surfaces that mate with the head gaskets look, you may wanna get em milled off a bit, even though this raises CR it's good idea if you've blown head gaskets.

yeah, you've got a point there it's really embarrassing to have the crank fly out on the highway when you're trying to show off or are at the track, give em something to :o at though

Bigal:the prob isn't the caps, billet splayed caps from Chevy are about $150/set vi gmpartsdirect.com, the problem is that it costs about 6-7 times as much to get em align bored in the block. I'd guess that you upgraded to 4 bolt caps then. I found a guy that's running a pair of T04Bs with...

http://www.gmgoodwrench.com/gmgoodwrenchjsp/perfparts/partlist.jsp?cat=9314&section=ep I'm looking at the bottom block on this page, it's a 4 bolt splayed nodular iron cranked block. It's about $700 cheaper then a 4 bolt billet capped block. I was wondering if A)anyone had purchased one, if...

http://www.gnttype.org/techarea/turbo/turborebuild.html here's a guide for GN rebuilds in case you decide to do it yourself, even though the GN uses a Garett versus a Mitsu turbo it will give you the general idea of what/how you need to do it if you decide to do it yourself. I know a diesel...

do any intake/exaust mods as of late or anything else that'd make it louder? Turbos do have a tendancy to whine, listen to a diesel. Other then that I'd check oil pressure to the turbo, if it's off then I don't like the ideas of what could be wrong myself. Check this site, it's got a...

it's easy enough to check if it's going nuts, just pull the vac line off of it and see if it still sputters, mine had a diaphram in it that was bad, so I just left it disconnected for 2 or 3 months in my Astro, finally got around to filling it full of epoxy this weekend. I strongly reccomend...

Done a quick search on these, and everyone talks about em, however one thing I've never heard anyone talking about actually running them. Anyone running these, and how much boost are you using if you are. I'm not a Syclone/Typhoon owner, but I've been researching a turbo 4.3L project for...