my mods - what can i expect ???

dirtdemon

dirtdemon

"mr. ghettowrench"
howdie guys,

i know its noobie-style, but i'm wondering what aprox. HP my engine will produce after the following mods :

atr coolair, cat-delete, 3" atr catback, AFPR @ 47psi, stg 10n1 :cool:
... the things to have , think for u guys wouldnt be that hard to answer me, cuz should be kinda everyday- tuining :rotf:

in advice,
pat.
 
SyTyJedi

SyTyJedi

Jedi Council
Re: my mods - what can i expect ???

I would be more concerned about having good boost control with that setup. Deleting the cat = stock WG not being able to control boost on MOST trucks. Look into an external wastegate to keep things safe and under control.
 
dirtdemon

dirtdemon

"mr. ghettowrench"
Re: my mods - what can i expect ???

SyTyJedi said:
Deleting the cat = stock WG not being able to control boost on MOST trucks.
Click to expand...

... aye, but the chip ( STG 10n1) should handle this IMO , right ???

and the HP-gain, like i said : aprox. ???

thx.pat.
 
VermontTy

VermontTy

Support Our Troops
Re: my mods - what can i expect ???

No....your chip will just read boost and run the wastegate solenoid accordingly, but if the wastegate itself cannot vent quickly enough, you'll overboost. The previous owner of my truck removed the cat, and promptly split the crankshaft in two.

for HP, take a look at the dyno run below. It isn't quite a stock motor, but should give you somekind of baseline to 'guess' from.

http://www.whitetyphoon.com/dyno/index.html
 
dirtdemon

dirtdemon

"mr. ghettowrench"
Re: my mods - what can i expect ???

@ vermonTy :

... thx. man, but knew richards page already ;)

the overboost-thingy surprises me, because my motorguy (use to be really a hero in sytys here) told me that if i got that chip in, its possible to delete the cat ...hmmm :werd:
so what should i have to fix, in order to run my truck savely (exept reinstallt the cat *gg*) ???
the stock WG was tested and tuned about a year ago, so that i can say it works properly like it should ... do i still have to worry :squint: ???

TIA pat.
 
bezerk

bezerk

New member
Re: my mods - what can i expect ???

well, to be honest, some people have overboost issues with the deleted cat, some don't...just datalog it a few runs, and keep an eye on the aftermarket boost gauge, and no...the chip won't help you with overboosting
 
D

denny

Active member
Re: my mods - what can i expect ???

dirtdemon said:
howdie guys,

i know its noobie-style, but i'm wondering what aprox. HP my engine will produce after the following mods :

atr coolair, cat-delete, 3" atr catback, AFPR @ 47psi, stg 10n1 :cool:
... the things to have , think for u guys wouldnt be that hard to answer me, cuz should be kinda everyday- tuining :rotf:

in advice,
pat.
Click to expand...

185hp if it runs like poop, 350 if it runs like a beast
 
dirtdemon

dirtdemon

"mr. ghettowrench"
Re: my mods - what can i expect ???

bezerk said:
well, to be honest, some people have overboost issues with the deleted cat, some don't...just datalog it a few runs, and keep an eye on the aftermarket boost gauge, and no...the chip won't help you with overboosting
Click to expand...

... FAWK !!!

but thx for your honesty :cheers:
 
ZavzTy547

ZavzTy547

Senior Member
Re: my mods - what can i expect ???

TurboJunk said:
expect to hopefully not blow up [all smiles]!!! just kidding
Click to expand...


I ran no cat with an STG chip with no problems but you have to really make fine adjustments to the wastegate for it to vent correctly, without it overboosting. The good thing about your chip is that it will most likely cut the fuel, if it senses overboost but then again, I would not rely on that safety feature alone..
 
SpoolingTurbo6

SpoolingTurbo6

Donating Member
Re: my mods - what can i expect ???

rotf.gif
rotf.gif
rotf.gif
denny said:
185hp if it runs like poop, 350 if it runs like a beast
Click to expand...
rotf.gif
rotf.gif
rotf.gif
 
dirtdemon

dirtdemon

"mr. ghettowrench"
Re: my mods - what can i expect ???

@ ZavzTy547 :

ZavzTy547 said:
I ran no cat with an STG chip with no problems but you have to really make fine adjustments to the wastegate for it to vent correctly, without it overboosting. The good thing about your chip is that it will most likely cut the fuel, if it senses overboost but then again, I would not rely on that safety feature alone..
Click to expand...

... adjustmens ? - like in the service-manual or else ???

please :repost: , please
 
bezerk

bezerk

New member
Re: my mods - what can i expect ???

there is a Rod attached to your wastegate flapper, this one is connecting your actuater with the flapper in the turbo to vent off exhaust pressure to control your boost.
missing Cat can over boost, if you are having overboost isseus turn the rod alittle bit longer, and try again.
be sure to datamaster.
 
dirtdemon

dirtdemon

"mr. ghettowrench"
Re: my mods - what can i expect ???

i m new to DM - got the programm already, but still searching for a cable ::steamer:

... anybody help me out ???

TIA, pat.
 
bezerk

bezerk

New member
Re: my mods - what can i expect ???

dirtdemon said:
i m new to DM - got the programm already, but still searching for a cable ::steamer:

... anybody help me out ???

TIA, pat.
Click to expand...

someguy named Peter, is selling these cables in austria, that's were i bought my first cable
 
You must log in or register to reply here.
Top