Help needed in CA!

Damian

Member
IS there anyone in the LA/OC area that is pretty good at working on these trucks thats willing to help me out? Im having ignition problems and I cant figure them out to save my life. Ill cough up money/beer/food, whatever. Im not stupid rich, but I take care of those that take care of me. My schedule is pretty flexible, so I can work around you.

Thanks in advance.
Damian
 

neildemo

Administrator
Re: Help needed in CA!

Year and half ago i couldn't diagnose anything on these trucks. I met some very talented individuals on here and did alot of reading and used the search. I have multiple trucks and most all problems can be solved with these items.

1.Vac lines "check for leaks>call Tom at sportmachines sells a great kit even a dumby like can install thanks to there attention to detail and quality"
2. Distributor cap, Plugs and Wires.
Use ngk ur5's or ngk ur6's
3. If it still runs rought timing might be off But start with the first 2 steps.


You can do it. Were here to help just post with pics and answer the questions board members will ask
you.It might take you a bit to get all the bugs worked out but will be well worth it. Good Luck.
 

Damian

Member
Re: Help needed in CA!

I just put back in my rebuilt motor and it wont start. I found this thread (finally), so Im going to do all that is in that thread first. RPM is about 50-60 miles from my house and I dont want to pay for that tow bill.
 

Damian

Member
Re: Help needed in CA!

Ive replaced everything so far. The distributor is stock, but cap and rotor, plugs, plug wires, ignition coil all are new. All new gaskets/seals. The whole bottom is new minus the rods/crank.

Im going to go try some of the things in the link I just posted right now, hopefully that helps. I just cant find the damn tan wire.
 
Re: Help needed in CA!

Ok set tdc then spray some starting fluid or pour some gas into the intake if it doesnt start you have a spark issue/ignition issue AND IF IT STARTS YOU HAVE A FUEL ISSUE GOODLUCK
 

Damian

Member
Re: Help needed in CA!

I have fuel, I can smell it in the exhaust. I have spark, the timing is just off. I hate this thing to be honest. My other cars are super easy to do. I set it at TDC on BOTH marks on the crank, still not start, and Im having difficulty lining up the oil pump and distributor so they are both TDC as well. My Eclipse never had problems like this. I would have been done last week, not still messing with it.
 

Black Knight

I Glow Therefore I am
Re: Help needed in CA!

Which line on the crank am I supposed to go off of?

Mark both spots on the balancer, use the one on the left when looking down on the motor from the front, dont line up with the tube use the first valley mark just to the left of it.
 

Black Knight

I Glow Therefore I am
Re: Help needed in CA!

It's very possible that the balancer has spun a little (common on our vehicles), you might try and retard it then a little and see if that changes things.

Are you 100% sure you're not 180* out on the distributor? It's happened to me once or twice you try flipping all the wires real quick to ensure.
 

Damian

Member
Re: Help needed in CA!

I tried rotating the distributor more than I should have to and it wont do anything if I flip the distributor 180*, I tried. Im done for the day, I have to do some sort of studying for my test tonight.
 

jaystcb

Sy 0902, 92Ty 0909
Re: Help needed in CA!

remove the cross tube,
remove the upper fan schroud.
remove the surp. belt
remove the fan
remove the distributer cap

attach a rachet and socket to the crank

remove plug #1 and put a 12 inch piece of a coat hanger in the hole. DO NOT LET IT FALL IN.

now. turn the crank untell you feel the piston at TOP OF THE CYLINDER. now look at the rotor. it should be pointing tords cylinder #1. if not, then keep turning the crank untell it is.

now LOOK down at the timing marks on your balencer. if they are not at TDC. you balencer spun and you will need to get some white paint and make a new timing mark.

now check your wires to make sure that thay are going to the correct cylinder.

put it all back together.

sent by iphone
 
Last edited:

Damian

Member
Re: Help needed in CA!

Are there any electrical plugs that I might have mixed up that would prevent me from starting the engine up? I dont have anything not hooked up, except that one little one wire plug that wasnt hooked up by the FPR when I bought the truck.
 
Top