nightdiver
Active member
You mean the Fast control or what ?
Building a new A2A
- Thread starter nightdiver
- Start date
GEN3Typhoon
New member
Nope.. I have one of Brian's Controllers on the way to me.
Put the IC up in the truck last night...
I hope this pictures lets you see where it is at under the bumper
Put the IC up in the truck last night...
I hope this pictures lets you see where it is at under the bumper
nightdiver
Active member
I sure like it .It flows 1500 cfm...i guess youll never see pressure drop in the system
I have to buy the heads before i start thinking something like this
Is the piping 3 inches made ?
I have to buy the heads before i start thinking something like this
Is the piping 3 inches made ?
GEN3Typhoon
New member
I am making the piping all from Aluminum.. while I already have most of the bends I need.. I am waiting on my couplers and the hump hose I ordered to arrive.. also got a nice 4 to 3 inch reducer for the throttle body.
One these are here I will make the pipes.. incidentally .. the truck is retaining the AC, cruise, etc.
I buy my bends from Burns Stainless... they are very nice people.
And you are right.. I should see almost no pressure drop .. I have a T66 and with the kind of power I will be making I should see little or no pressure drop.
Later
One these are here I will make the pipes.. incidentally .. the truck is retaining the AC, cruise, etc.
I buy my bends from Burns Stainless... they are very nice people.
And you are right.. I should see almost no pressure drop .. I have a T66 and with the kind of power I will be making I should see little or no pressure drop.
Later
GEN3Typhoon
New member
Water Tank
Water Tank
I started on the water tank last night.
I thought I would post one pic of what I have and one pic of the location in the truck.
Pretty straight forward.
It measure internally to 665 cu. in. in case anyone cares.. :-?
Water Tank
I started on the water tank last night.
I thought I would post one pic of what I have and one pic of the location in the truck.
Pretty straight forward.
It measure internally to 665 cu. in. in case anyone cares.. :-?
nightdiver
Active member
You sure need a heat deflector.Its hot like hell right there,but im sure youve got something in your mind 8)