Search results

Re: Ty still not running right Thanks. The damper is new as well. I don't think it is timing. I have put a fuel pressure gauge on it and it sits at 42lbs. The fuel pump is new. As it is stock, it shouldn't need more fuel. I am thinking it is the Cat or possibly the ECM.

Hi Guys, I am located in the OC and have a TY that I just can't seem to get right. Spent alot of $$$ and still suffering. My main problem is I have no point or reference for "normal" noises, etc. Is there anyone in the forum who is in Orange County who would be willing to catch up and have a...

Re: Ty still not running right Any other suggestions? I am looking at changing the ECM. Do I need to change the whole box or just the board and chip?

Re: Ty still not running right Yep. Whole truck is stock.

Re: Ty still not running right I have no idea what that is about. There is a point at frame 840+ that it breaks 100%. What could cause this?

Re: 1993 ty stuff Please list other parts. Thanks

Re: Ty still not running right Here it is. http://www.mediafire.com/?v3erf09eazf9yeo

Re: Ty still not running right Thanks for the tip. Doesn't seem to be happening. I have enclosed a shot of the DM. As you can see, it is all over the place. Any other ideas?

Hi Folks. Pursuant to my previous post, my Ty is still not 100%. At WOT it goes well except for a short loss of power that is intermittent. As well, it chugs a bit at about 1,700rpm while in 4th gear. I have pulled a DM file and nothing is standing out. Since my last post I have replaced the...

Re: Fuel Pump Wires--Help Please Well I must have been send the wrong pump as the one I was sent had a difference plug at the top which required me to change the wires.

Hi guys. Bought the recommended Worlbro fuel pump. Put it into my Ty, and.............it is screwed. I did this over 2 days, so I think I may have gotten the two wires backwards?? Don't know if this is possible, but as you know the wires need to be changed for the new pump. So, question is...

Re: Help with poor running TY Thanks. I think I will get that done. Will revert back when finished.

Re: Help with poor running TY How do I know if it is a boost leak? The Datamaster shows me getting up to 15lbs.

Re: Help with poor running TY So fuel related? The gas is 91 + some booster (not too much, just trying to get it to 93).

Re: Help with poor running TY Hi Guys. Replaced ignition module. Certainly improved the knock and retard and eliminated the trouble code. HOWEVER, still loosing power at WOT. At 3,400 RPM it flatlines and even goes backwarks at bit while under load. I have uploaded 2 x files to...

Re: Help with poor running TY No--I haven't replace the Ign module yet. Gonna have to wait until next week. Will update when poss.

Re: Help with poor running TY Coil is new and so are plug wires. I will get a new ig module. Thanks for the help guys.

Re: Help with poor running TY Yes, the tach does jump a bit. Any way to test the ignition module?

Re: Help with poor running TY DM file is here http://www.mediafire.com/?0mti1kc2i9d8h28

Re: Help with poor running TY Still don't know how to upload to that? Just goes to the page with no options for upload.