Search results

Re: any pics of an alky nozzle install location? I just ordered my kit from smc enterprises. looking forward to installing it

Re: anyone using an smc alky kit? thanks for the info. any other smc users out there?

Re: anyone using an smc alky kit? thank you. do you have any pics of your install you could show me? what kind of alcohol are you running?

Re: anyone using an smc alky kit? That's were I was contemplating my reservior location. Do you have your spray nozzle mounted in the end of your intercooler near the throttlebody?

Re: anyone using an smc alky kit? Were did you mount your spray nozzle and reservior? I have the Kenne Bell cold air kit on my truck, which moves the coolant overflow bottle over next to the oil filter. Thanks

Re: anyone using an smc alky kit? nobody is using this kit?

i am interested and wanted to know if anyone has installed steve's kit on their truck.how was the installation? thanks

Re: any pics of an alky nozzle install location? that's good info. anyone else have any installed pictures?

I'm thinking about the SMC alky kit and wanted to see anybody's install pictures. The kit for our trucks is the universal kit. Thanks

Is it normal for a wrking oil pressure gauge to peg past 80 when cranking on start up then show the correct oil pressure. I'm trying to determine if my oil pressure switch is good. Thanks

Re: does anyone run 36 lb. injectors? Thanks Maxtor.

Re: does anyone run 36 lb. injectors? That's what I'm interested in.I just resently bought an ultimate chip for stock injectors and don't want to have to change my chip. What is your fuel pressure set to?

contimplating new injectors.I don't want to go up to 50 lb. injectors.Anyone using 36 lb. injectors? thanks

Re: ultimate chip user's,knock light flickers intermittently Yes it is . 63000 miles on it, 93' model.cold air kit, hi volume intercooler pump and exhaust.On my GN, i ran an SMC Alky kit and on my 89 TTA, I used Alkycontrol. Both nice kits.

Re: ultimate chip user's,knock light flickers intermittently I ran 2 cans of top engine cleaner through the engine and changed the oil. I drove the car last night and got on it.I got a flicker on the shift and at wide open saw the light come on again at 16 psi.I again immediately got out of it...

Re: ultimate chip user's,knock light flickers intermittently Here's the latest in the quest for no knock. I installed the new GM coil, it did not help at all. Then I added 2 gallons of xylene to a full tank of 93 fuel. Now the light did stay out until around 9-10 psi of boost on setting t116. I...

Re: ultimate chip user's,knock light flickers intermittently I have tried the t116 setting to no avail. I will check the motor mount though. The truck does shake alot at idle. Thanks Bruce.

Re: ultimate chip user's,knock light flickers intermittently Today I verified my base timing was "0". I did find a local paint store that sells xylene, and I will purchase some tomarrow. I also bought a new AC Delco, coil and ignition module. Would it be a good idea to try and find one of the...

Re: ultimate chip user's,knock light flickers intermittently Being a novice, I just found that the base timing is 0, not 10 .I have not yet verified my base timing, but I will.I also read about ignition modules going bad in these trucks, Is this true?Are ur5 ngk's ok in a mostly stock truck...

Re: ultimate chip user's,knock light flickers intermittently I'll pick up some xylene and get back with a response. Would it be benificial to retard the base timing from 10 degrees to 6 ? What is considered the most allowable knock retard. I know ideally 0 degrees,but with buicks it was between...