Search results

Tip of the Day Tip of the Day One thing, do yourself a favor when you start replacing things. Ditch the studs and replace with Stainless Bolts (downpipe), as a matter of fact, replace all bolts, washers with stainless, it will be a little less "painless" the next time. May run you $30.00 or so...

Mileage? How about 246,000 and counting on a Syclone Mileage? How about 246,000 and counting on a Syclone So far, 246,000 and counting. Currently in for some mods, but last time at the track was a 13.20 stock with a 3 bar. Was a daily driver from the original owner, she is getting a rest right...

ZR-1 11" and Discount Tire ZR-1 11" and Discount Tire I took the AFS website package to my local Discount Tire, they matched the deal locally (within 60.00) and I have a local warranty. You might try it, worked for me and I now have 17x11s in the back, 17x9.5 in the front on the ole Typhoon.

Reply to 20G Reply to 20G I have the 20G 14CM2 and like the top end I picked up. Some like Ivan experimented with the 10CM2 housing with good results but I hear that housing is hard to find. If you have the stall converter, 9/11, then you are ok. but if not, the spool is slow with the stock...

So where is he? What Hospital etc. So where is he? What Hospital etc. Someone in the "know", please post the hospital and room etc. We need to know and we need to show our support. Sincerely, Steve Central Texas area.

Best Pan Best Pan I too have the Derale with no issues. :roll:

TASTY, I like it dude. TASTY, I like it dude. Whoo whoo buddy, I like it.

Another Texas Dude, cool Another Texas Dude, cool I have been wondering the same thing, thinking the Flex-a-forms and one of these would be a good combination. Already have the Flex-A-Forms installed.

I have the 20G on my Ty, moved the stock actuator over to it, added a spring per Daron's suggestion. Things are ok, but I hear that there is HD actuator available for the Mitsu that starts at 15lbs. Anyone have a source for these?

Interesting couple of days. Had a check engine light come on at a light, found out later it was a code 45,interesting. Typhoon running like crap under boost. Took it back to the house and parked it. Later that evening I took out the diacom, started playing with it to find out what was going on...

Exhaust heat can cause issues, this has been reported by members in the past. http://www.totalaccess.net/~center00/Flexaform/installing_flex.htm is a page I put together awhile back, need to update it soon. I tried to include some do and don'ts in it. Hope this helps.

Actually that is a guy from Austin TX area. _________________ I would rather have a "bottle in front of me instead of a frontal lobotomy" 20G 14CM2 Best 60ft 1.78 GB01 Best 1/4 13.04 @ 103.60 GB01 on 15lbs boost <font size=-1>[ This Message was edited by: redty on 2002-01-30 23:49 ]</font>

I too have seen issues in cold weather starting, however I seemed to have remedied mine by doing something very simple. I just pulled the ECM fuses for a few seconds, then put them back in and started her up. After that, the Typhoon seems to have adjusted to what ever it needed and now starts...

The SBC chevy balancers work for the 90degree V6s like ours. I am currently using the FuidDamper/StreetDamper from Summit. The only problem was having to bend the little timing tang up a little. The offer smaller dampers that would be a direct fit, but you pay about $80.00 or more for the full...

Don't confuse the two. All Syty's have a roller cam, meaning roller lifters. The "rockers" can be standard or roller tipped or even full roller. If the cam in your truck is not stock, then there may be the problem using the 1.6s, other members can correct me, but I do believe the pushrod opening...