Search results

Re: c5 z06 rear disc brakes input Here is what kore3 told me. I have an older style rear end. "The bracket kit you purchased was designed for a 10-bolt with the small GM inverted trapezoidal housing pattern and 2.81” brake offset dimension, which is the distance from the outside of the axle...

Re: c5 z06 rear disc brakes input I thought about that and that's probably what I will need. I would need a different bracket. This is the bracket I have:

Re: Brake setup question Thanks. Any chance your friend can still make the bracket if I need it?

Re: c5 z06 rear disc brakes input Throws, did you have this problem? I don't have clearance to mount the bracket.

Re: Brake setup question Garnetty It seems the bracket from kore3 doesn't fit the rear. Any chance I have the wrong rotors? They are rear rotors for a c5 vette. Is that what you used? Any chance I could get a rear bracket from your friend? The kore3 doesn't have enough space. It mounts on the...

Re: step by step LS1 brakes how to install with pics Is there a way to tell which axle goes on which side? Measurement or marking? I took mine out and forgot to keep track of what side they go back in.

Re: Post a pic of your truck taken today "put it away" ?????

Re: What happened to sytyauthority.net? I just couldn't remember the rear diff capacity and knew it was on the site. I went to the site and noticed it wasn't working.

Re: What happened to sytyauthority.net? Ha. That's pretty bad ass. Thanks

I was going to look up some info on sytyauthority.net and it is no longer there. Did it get merged with another site or is it just gone?

Re: ??? how do you disassemble sun visors? I always wondered about the visors and what it would take to pull them apart and recover them. I did my headliner, but I never bothered to try the visors because I was unsure what was involved.

Re: WTB dome light I recommend you switch to an LED bulb. That way you can prevent your new lens from yellowing. :2cents:

Re: Kore3 rear disc brackets Oh, duh. I get it now. Thanks.

Re: Beltech rear sway bar Anyone ever figure this out for the Syclone? I already have the Belltech BEL-5520 (1") sway bar on my Syclone and I am about to add the Belltech lowering springs BEL-5954 with JTR setback plates, but I am worried about this clearance issue brought up in this thread...

Re: Torsion Bar Delete Crossmember This requires coil-overs right? Torsion bar delete cross-member because the installation of coil-overs?

Re: Kore3 rear disc brackets I don't think they are listed on the site anymore. They probably still offer them, just email them. According to the instructions I have, the bracket does allow for use of the drum in hat parking brake, but I didn't bother. I have never once used my stock...

Re: Kore3 rear disc brackets I'll add a hole definitely. When the instructions say "machine the outer axle flange to 5.94" and add a 1/8" x 45 degree bevel to ensure rotors will seat properly" it means cut the top off that extends up above the bracket, right?

I was finally able to get some time to get my rusted drum brakes and backing plates completely off so I began to look at the instructions for my kore3 rear brackets. In the instructions it says to measure the holes on the axle, however in the diagram it shows 4 holes. My axle only has three...

Re: Reno Members? Were these two trucks involved with customrestore?

Re: Syclone in West Haven CT To clarify, this one sold for 18K: http://www.ebay.com/itm/GMC-Other-syclone-1991-gmc-syclone-base-standard-cab-pickup-2-door-4-3-l-/261503476841?forcerrptr=true&hash=item3ce2d26469&item=261503476841&pt=US_Cars_Trucks The one in CT appears still for sale...