Re: Sy #2193
The truck also sat in several feet of snow during the winter season for at least 7 of those years. I was going to buy it for $4500 then. No way is it worth 8k except the fact that it had low mi I believe
Re: Sy #2193
I was going to buy that one about 11 years ago. The guy was a meth head and it was located in a small town called miwuk village, ca near twain Harte, ca. I doubt it been maintained in those 10 years as it seems like it is in the same condition now as it was then.
Re: FS: "Ultimate"? 10n1? chip
I have a newer gauge style control box w/o the chip. I wonder if they will work together. Do u happen to know if this is for 50lb injectors or stock?
Re: Oil leakage...
I used a square razor blade and took my time scraping it off of the block. I was able to get the adapter out of the way using applied force torward the wheel. That cleared up just enough room. After the gasket was off I used a kitchen scouring pad & degreaser for the finish work.
Re: Oil leakage...
If you go with the spin on you have to remember the oil cools the turbo. That's why there is an oil cooler, don't know if I would risk it. But I don't know enough about what temperatures are involved/tolerated in either method to point you In the right direction.
Re: Oil leakage...
I just replaced the gasket yesterday on my sy. it seemed to have fixed the leak. my underside was grimmy as well and i believe that was from the oil dripping from the block oil relocation onto the propshaft and spraying the underside of my sy. you can always pressure wash...
Re: Oil leakage...
If the leak is coming from the filter relocation at the block, you can fix that yourself for about $6 (dorman 82560 gasket/o-ring kit) and 1-3 hours of elbow grease depending on how easily the old gasket comes off. mine was a P.I.T.A.