Recent content by 99Xtreme_lover

straight plug . They should fit on the head. you have to check if the rest of the headers would fit in the negine bay .

It sounds the same what happened to mine but without turbo but that was when we were playing with the ditributer to set the timing , so maybe its off or maybe the distributor is going bad .

I have done 225 shot on stock crank but with an 2 stage and made more then 400 rwhp . You have lots of good parts ( block and heads ) why would you like to risk all that with an cast crank ? This is just my opinion . On an turbo motor it should be fine but the nitrous is twice more hard on the...

The 96-up with vortecs uses metric studs . L35 have 3/8 i think . c-ya

great , thats what i wanted to hear . thanx

Thats why i'm getting an stroker evenfire crank . I have accel DFI GEN 7 . I wouldn't like to rev it that high , so if i would only like to rev it to 6500 k MAX would i need those "big"heads ? And what bore do you have 100in6 ? I would realy like to use my stage 3 heads and my modified ramjet...

Sory , i meant 4.155 bore . Mike told me people had gone 4.18x with these blocks . So 4.125 bore should be absolutely safe and if something happens i can bore it 0.030 over and then get 4.155 bore .

Its decided , i'm getting an stroker billet crank and 4.125 bore and there is still some good meat . I would like to go wtih 2.155 but i would like to have the option to bore it later if something happens . So thats gonna be around 300 ci rigth ?

Thanx for the reply . I changed my mind on the oddfire crank and i am gonna get an billet stroker crank with an big bore so close to 300 ci . So now i think my vortec heads would be a little small for this setup ( i think ) . 6 K for the complete setup !!!!! OMG :o . So does the 18 degrees...

Thats what i was thinking too . Shit , now you let me keep thinking on selling my new oddfire crank to buy one of those billet stroker cranks :roll: . The 3.73 stroke with 4.30 bore sounds great too to me .

I think my blocks maximum safe bore is 4.150 . So i am thinking on going with 4.125 but i would like to know if it is realy worth it on an boosted motor etc...

Sup I would like to know whats the bore size the peoples with bowties are running . Like hoovers , mike lee , robert from sweden, etc... etc... And what stroke etc... I need to decide which route i go . Thanx

Sup I'm thinking on buying some pontiac heads . Do anybody know if i could use all my valvetrain setup that i have on my stage 3 vortec heads on the pontiac heads ( promagnum roller rockers , etc ... ) ? That would save me some money or would i need to buy the jesel setup ? Thanx

ohh and one other thing . When is spring ? i don't know nothing about spring and summer and stuffs like that . thank you

Great , but would i need a diferent box or i would need to the send the box to change something ? I'm not going to use bottle anymore . Thats my old setup . Now it will be turbocharged with an bowtie block oddfire . Thanx for the help . keep us in touch .