WTB: Billet Crank

[Nickey427]

Looking for a billet crankshaft. Preferably evenfire, but will look at oddfire as well. Stock stroke or longer, if you have rods to match that's even better.
Let me know what you have!

Thanks.

 

[proptop]

What Stroke and what is your budget? I have everything to build a short block sitting here on the shelf. Also do you need it right away as you could always give Pete Harris a call at Crower and he can build anything you want.
Thanks,
Bob

 

[Nickey427]

Looking for either a 3.48 or 3.75 stroke. I already have an email into crower, but just looking to see if the used market has anything to offer.

 

[proptop]

I get it. Give Mike Lee a call over at RPM he might have something laying around. Pete built me a 3.750/6.00 rod combo.
Bob

 

[TYTILIDIE]

You are going to have a very hard time fidning what you are looking for without going to Bryant. You're going to want to say "but they charge $3500". Well my friend...that's just how it goes. I will say though, it is likely to be the last crank you ever buy. I went through 4 stock cranks and I can tell you that not one time they went out was it convenient by any means.