What Have I Done?

TYTILIDIE

METH HEAD
Lately I have been really procrastinating on getting my wiring going for my project. Well, tonight I got the harness out and laid it out flat. What a mess!! So I got all of the look off and started picking at the harness as to what I do and don't want. Here is what I end up with that I don't want or need

And the good stuff


:rotf:
I bet I need loom half the size it was originally. I have followed every single wire before cutting and am pretty sure I have it all down and ready to roll. I have a wiring diagram coming to me soon so I will simply double check what I have done and make all my repairs and modifications. All relays are gone, the junction post is gone, the ABS wiring is gone, the temp sender is gone, oil pressure switch gone, I would say I now need about half the loom size I needed before. If anyone has any input or thoughts I'd like to hear them.
 

bezerk

New member
Re: What Have I Done?

Lately I have been really procrastinating on getting my wiring going for my project. Well, tonight I got the harness out and laid it out flat. What a mess!! So I got all of the look off and started picking at the harness as to what I do and don't want. Here is what I end up with that I don't want or need

And the good stuff


:rotf:
I bet I need loom half the size it was originally. I have followed every single wire before cutting and am pretty sure I have it all down and ready to roll. I have a wiring diagram coming to me soon so I will simply double check what I have done and make all my repairs and modifications. All relays are gone, the junction post is gone, the ABS wiring is gone, the temp sender is gone, oil pressure switch gone, I would say I now need about half the loom size I needed before. If anyone has any input or thoughts I'd like to hear them.

i did the same thing and it sure cleaned things up. indeed the loom shrunk about half it size if it wasn't more. i have pics in the memberprojects area if you want to see what i took out.
looking good!
 

TYTILIDIE

METH HEAD
Re: What Have I Done?

I will definitely check that out. Need to go get some solder crimps so I can start putting this thing back together. I also need quite a bit of wiring. I am giving serious thought to running my aftermarket gauges in with this but the only bad thing would be if something went wrong apart it would have to come. I have the entire map of the wiring figured out so now it is just a matter of planning ahead for everything going in.
 

Silly

Banned
Re: What Have I Done?

You sir have some patience. I thought about doing that as well but said screw it and bought a painless harness
 

TYTILIDIE

METH HEAD
Re: What Have I Done?

believe it or not i actually love doing harnesses lol

I rather enjoy it myself. Only thing I don't like about it is when you need something to go any further and it is 1:30am. Here, I got a little further, not sure if it looks the same to everyone but it is really coming along nicely.


Even got in some time on the heater controls harness. Ran out of loom though.

Now the only thing I may have a real problem with is that I plan to mount the coil in the cowl. I want to buy NEW connectors for it but have to wait until Monday to find out if they are even still available. May buy a weather pack kit at as well. So the only thing that really is a serious issue with me is that WB controller.I really don't like it mounted in the engine bay but can't figure out how to really mount it in the cab with out drilling a HUGE hole.
 

Don W.

Stab it and steer it
Re: What Have I Done?

Mike, if you can wait a day I take a pic of how I installed my (PLX) WB. I'll add the other ways I've gone through the firewall as well.

BTW I think your are one brave sole to do what yur doin'. No quarrel with the motivation but I'd be afraid of screwing up with no way to go back. :rotf:
 

TYTILIDIE

METH HEAD
Re: What Have I Done?

Mike, if you can wait a day I take a pic of how I installed my (PLX) WB. I'll add the other ways I've gone through the firewall as well.

BTW I think your are one brave sole to do what yur doin'. No quarrel with the motivation but I'd be afraid of screwing up with no way to go back. :rotf:

Is the PLX controller similar to the LC1? I can certainly wait. I have decided to not try and hurry this up, I have fuel system parts arriving by the end of the week so I thought I would really not rush this and take my time. I am 100% everything I have done so far is correct. It's just a harness man:lol:
 

Don W.

Stab it and steer it
Re: What Have I Done?

Is the PLX controller similar to the LC1?

Based on your pic, no, they are not. But I'll post up what I've done anyway.

It's just a harness man:lol:

Ya, I know. :roll: And I've done some work on mine actually. Hey, maybe with your wiring project mine might fire before yours after all. Assembly will be starting this week and I loose my fancy shop space at the end of Feb so I'll be rock-n-rollin'. :lol:

Take care...
 

TYTILIDIE

METH HEAD
Re: What Have I Done?

Hey, maybe with your wiring project mine might fire before yours after all. Assembly will be starting this week and I loose my fancy shop space at the end of Feb so I'll be rock-n-rollin'. :lol:

Take care...

I don't know maybe. I am actually pretty close to done with the wiring. I just need to order the coil pig tails and thats about it. Have a few t's to put in as well. As a matter of fact, here is how it looks after this morning

Are we racing?:lol:
 

bezerk

New member
Re: What Have I Done?

I don't know maybe. I am actually pretty close to done with the wiring. I just need to order the coil pig tails and thats about it. Have a few t's to put in as well. Are we racing?:lol:

tell me you're soldering everything up. don't use clamps ot tees. that is asking for a drama.
 

TYTILIDIE

METH HEAD
Re: What Have I Done?

tell me you're soldering everything up. don't use clamps ot tees. that is asking for a drama.

Well yeah, that is the whole point. I use soldering barrels. Then slide some heat shrink over the splice. The T's I refer to are the plastic ones that go over the looming. BTW, I can't find your thread to save my life. What was it called?
 

Don W.

Stab it and steer it
Re: What Have I Done?

Mike,

In the location pictured there is dimple. I used a step drill to drill a hole big enough for everything. Don't ask why the red wire's aren't in the loom. Anyway, the hard part believe it or not was finding a grommet. Finally found some on the Internet. On the inside there is a pre-punched hole in the padding/insulation above the throttle. Believe it or not you can reach this spot with the engine in place.

HTH a bit.
 

Attachments

  • P2020450.jpg
    P2020450.jpg
    64.5 KB · Views: 0
  • P2020449.jpg
    P2020449.jpg
    51.9 KB · Views: 0

TYTILIDIE

METH HEAD
Re: What Have I Done?

Thanks for the pics Don. Unfortunately, my WB controller is on the passenger side. I want to find a grommet with a 1-1 1/4" O.D. and about a 1/2" I.D. that is really thick, made to put up with some environment. And slit it down the side. This way, I could run the o2 sensor through the hole and simply slide all of the harness through. I have yet to see one of these dreamed about grommets though.
 

warmpancakes

New member
Re: What Have I Done?

for grommets look at autozone for PVC grommets thwe mopar one works perfect 85 diplomat with a 318 if you need a application
 

turbodig

Active member
Re: What Have I Done?

Thanks for the pics Don. Unfortunately, my WB controller is on the passenger side. I want to find a grommet with a 1-1 1/4" O.D. and about a 1/2" I.D. that is really thick, made to put up with some environment. And slit it down the side. This way, I could run the o2 sensor through the hole and simply slide all of the harness through. I have yet to see one of these dreamed about grommets though.

They make "extension cords" for the LM-1 sensor... why not just use one of those? Cut it in half, feed it through a much smaller grommet, and resolder.

I don't know if the Innovate ones come apart, but taking the pins out of the shell is another option. Or, just cut and re-graft another connector:

http://wbo2.com/cable/connkit.htm
 
Top