VRE Project 10sec Typhoon

[Eric@VictoryRacing]

Re: VRE Project 10sec Typhoon

Correct. We did that to open up some room for a larger turbo.........maybe

It looks like a small connecting fixture in between the stock header flange and the turbo where the wastegate outlet is as well.

 

[Eric@VictoryRacing]

Re: VRE Project 10sec Typhoon

We made a templet, traced it onto some flat stock aluminum, painted it and screwed it on. It looks a little different now since we have installed an air to water intercooler, but still better then the HVAC holes.

I like how you did the firewall. What did you do to cover up the A/C / blower motor holes??

 

[PPI Typhoon]

Re: VRE Project 10sec Typhoon

We made a templet, traced it onto some flat stock aluminum, painted it and screwed it on. It looks a little different now since we have installed an air to water intercooler, but still better then the HVAC holes.

Nice, that's what I'm planning on doing, but can't decide on the thickness of the aluminum. Any tips?

Nice looking ride btw. :tup:

 

[roadkill748]

Re: VRE Project 10sec Typhoon

We used 26 gauge on ours.

 

[PPI Typhoon]

Re: VRE Project 10sec Typhoon

We used 26 gauge on ours.

Have any pictures?

 

[roadkill748]

Re: VRE Project 10sec Typhoon

 

[skipztt]

Re: VRE Project 10sec Typhoon

anyone know what kind of times this truck ran??

what kind of times would you expect with this setup??

i know.. old post lol

 

[It's just a six]

Re: VRE Project 10sec Typhoon

Just wondering on the stock heads if they had removed the intake obstruction,the high swirl vane?

Goodluck!