Ty1001

[Andreas]

This winter I wanted to clean up my engine bay.
From block up new gaskets.

The progress

Now only thing that needs a clean up is me...hahahaha

 

[QUICK STORM]

Re: Ty1001

sweet, good progress. keep it up

 

[midnightbluS10]

Re: Ty1001

Is there clearance to run that pipe over the intake manifold? I've never seen it done like that.

 

[Andreas]

Re: Ty1001

sweet, good progress. keep it up

Thank you. I've got acouple more days of small things to get done before inspection and taking it to the streets end off the week.


Justin:

Yes there are clearance. I'm currently running 2,5" tubes. 3" is gone hit the hood.
For now a run stockturbo and I see no point or redo the IC tudes to 3" right now.
But with bigger turbo I'll redo them. The thing that holds back the 3" is that the bend at the plenum that goes into the TB is to short. If I get a new 180* bend with bigger radius I can get the crossing pipe alot more up, towards cockpit. Then a 3" would work without hitting the hood.

 

[TurboJunk]

Re: Ty1001

Since your not running AC change the box. and how come you didnt reclock the turbo? other then that looks great!

 

[Andreas]

Re: Ty1001

Since your not running AC change the box. and how come you didnt reclock the turbo? other then that looks great!

I would like to get a non A/C box but its hard to get those here in sweden.

Well I tried to reclock it but its stuck as hell. I didn't want to get on it with the sledge hammer since I thought it would pop off oncontrollable and damage the turbine.
So for now its gone have that nasty bend to the IC.
When new turbo goes in I'll make a better pipe from turbo to IC.

 

[Andreas]

Re: Ty1001

Added som pictures of fuel lines/filter and a nice pic thru the front fender.

 

[super-gt]

Re: Ty1001

wow, that looks great, I wish my truck looked that clean under the hood.

 

[bezerk]

Re: Ty1001

nice progress,
as far as the stock turbo reclocking, there is a pin that keeps it from reclocking.

 

[Flyin Ryan]

Re: Ty1001

Looks good

Reclocking the stock turbo also requires you to some how re-fit the stock wastegate setup to the turbo right?

 

[Andreas]

Re: Ty1001

nice progress,
as far as the stock turbo reclocking, there is a pin that keeps it from reclocking.

DAMN!!! you telling me that now...hahahaha just kidding.


Ryan:

Yes that would be needed to I guess. I do run a ITS minigate on X-over pipe. But its blows straigt out in the air, and thats a no no in emission tests. So i hopefully get thru inspection this week and then lock the stock WG and put on the ITS again.

 

[Andreas]

Re: Ty1001

Adding one more picture I found in the picture folder about my Ty 1001.

Yes its dirty as hell, needs a washing :rotf:

 

[Black Knight]

Re: Ty1001

looks real good, where did you get your A2A setup?? I like the large cooler.
EDIT I found it in your old thread, sweet :tup:

 

[Andreas]

Re: Ty1001

I know there's good photoshop guys out there and I would appreciate some one did these 18" rims
on a blk/blk TY.

I couldn't find a pic from dead straight on to the rim thou.

http://www.teletyre.se/components/c.../product/42987d891018b600cb9055e8774bcfe6.jpg

 

[Andreas]

Re: Ty1001

Well the old picture server crasched a long time ago
Put the pictures up on another site.

http://s122.photobucket.com/albums/o248/ANDREAS2073/?start=all

 

[Andreas]

Re: Ty1001

Had to add some pictures from this weekends wrenching.

It was beutiful wheather and truck runs again.

Life is good.

Jim's clever dog. There were no telephone in the garage in the beginning so the dog came up from the house with a note that said "coffe time"

 

[Andreas]

Re: Ty1001

Past emmision controll and inspection today Truck is ready for the summer

 

[Quickstop [UK]]

Re: Ty1001

sweet!

 

[bezerk]

Re: Ty1001

reminds me that i have to work on my black truck again..damned

 

[Andreas]

Re: Ty1001

reminds me that i have to work on my black truck again..damned

LOL sorry