Ty #2467 winter project

jusssi

Member
It's time to start... I've been under my truck and didn't like what I saw; Some rust in frame, rear end, fuel lines, body. Oil leaks where is oil in; rear and front diff, engine, tranny, transfer case, steering, all engine oil hoses... :(
But first I'm gonna drop tranny/trans case and rebuild them. Any good ideas how to reach all bellhousing bolts, some of them are very hard... :roll:
I will update pics:
https://picasaweb.google.com/112633004388028370458/Typhoon?authuser=0&feat=directlink
 

turbojake

New member
Re: Ty #2467 winter project

i always take out the body mount bolts besides the rear ones and jack the body up a couple inches . then use a two foot extension with a wobble socket.
 

jusssi

Member
Re: Ty #2467 winter project

Ok, thanks for advice, and that sytyarchive is good site. :tup:
Now the tranny is on floor waiting go to rebuild.
 

jusssi

Member
Re: Ty #2467 winter project

New Tranny Pan.
DSC00198.jpg

DSC00197.jpg
 

jusssi

Member
Re: Ty #2467 winter project

Is there something wrong in this cross beam? There is alots of cuttings and weldings and it looks like somebody made own home fabrications to it.?
DSC00204.jpg
 

IpHoOnDyou

New member
Re: Ty #2467 winter project

That looks like room was made to remove the oil pan more easer?? Some one correct me if im wrong, but that what it seems like to me!
 

jusssi

Member
Re: Ty #2467 winter project

Yes, I thought same too. This was made poorly and I have to repair it. :rant:
DSC00205.jpg
 

jusssi

Member
Re: Ty #2467 winter project

New #60 Deka injectors. Was pretty cheap, €200,-/set (~$250)
DSC00212.jpg
 
Last edited:

jusssi

Member
Re: Ty #2467 winter project

Today I started t-case rebuild. First before exploding it, I made vc test, resulted 70-80 newtonmeters which means about 50-60 ftlbs. Is it good, I think it is?.
DSC00242.jpg

T-case looked pretty clean inside, what surprises me. And I hadn't any issues with it, just some slap from chain.
DSC00245.jpg

DSC00246.jpg
 

jusssi

Member
Re: Ty #2467 winter project

Some update... truck was on stands last summer and still have alot to do. Frame and body painted and waiting for to put trans, t-case, front diff. rear end, suspension, steering etc. back.
Terrible mess on firewall... :
DSC_0121.JPG
 
Top