Turbo Oil Feed Line

[Ty Pilot]

Ok, I have gone through the search results and got mixed information. I am looking to replace the stock Mitsu turbo oil feed line and need size information for the hose and -AN fittings. Looking to confirm, as I obviously want to get the right parts the first time out. Admittedly, this will be the first time I'm going to be making my own fitting/hose setup.

For the hose I got search results of -3 AN and -4 AN. Which do I go with?

For the fittings I have seen 1/4 NPT at the block and 1/8 at the turbo end.

Thanks in advance.

 

[Ty Pilot]

Re: Turbo Oil Feed Line

Anybody?

 

[Quickstop [UK]]

Re: Turbo Oil Feed Line

The block feed is a 1/4" NPT fitting and goes to a -4 AN fitting. Compare it with the fuel rail where the schraeder valve is if you're unsure. That is also a -4 AN.

The turbo is not an NPT fitting. It's a metric fitting and it is M12 x 1.5 and also connects to a -4 AN fitting/line.

HTH.

http://www.syty.net/forums/archive/index.php?t-94249.html

 

[jpz06]

Re: Turbo Oil Feed Line

I used a 1/4 in.superhose from the local refrigeration supply store,the only difference is one end is straight and the other is 90 deg. bend. they have them in different lengths.