Tunerpro RT Build 5.00.2660.00
- Thread starter SY-1193
- Start date
JSM
Active member
Re: Tunerpro RT Build 5.00.2660.00
Has it been released? I know Paul and I have been watching, Paul is working on it somewhat but was waiting for a stable release as we have created XDF's before to watch a beta change enough to need to start over.
If it has this is good, the bubble is new now, scanner pro is built in so we have gauges and not just numbers. The mismatch will no longer be an issue, etc.
Has it been released? I know Paul and I have been watching, Paul is working on it somewhat but was waiting for a stable release as we have created XDF's before to watch a beta change enough to need to start over.
If it has this is good, the bubble is new now, scanner pro is built in so we have gauges and not just numbers. The mismatch will no longer be an issue, etc.
SY-1193
Active member
Re: Tunerpro RT Build 5.00.2660.00
No, Not released yet...either one.
I have beta v5.00.1386 working with an Ostrich and Moates ALDL cable.
I have not been able to get this version to work with the APU1. connection problems.
The latest Beta v5.00.2660.00 is VERY DIFFERENT. I tried to convert an .XDF for it but it will need a lot of hand editing along with a very different .ADX. Many changes at least from what I can see.
I use to have a link to the beta stuff but now it is password protected. I of course don't have access anymore. I just liked to tinker with them. The Scannerpro integration is nice. Without a running truck I can only play with them when I have someone's truck (Big Mike's Truck usually).
No, Not released yet...either one.
I have beta v5.00.1386 working with an Ostrich and Moates ALDL cable.
I have not been able to get this version to work with the APU1. connection problems.
The latest Beta v5.00.2660.00 is VERY DIFFERENT. I tried to convert an .XDF for it but it will need a lot of hand editing along with a very different .ADX. Many changes at least from what I can see.
I use to have a link to the beta stuff but now it is password protected. I of course don't have access anymore. I just liked to tinker with them. The Scannerpro integration is nice. Without a running truck I can only play with them when I have someone's truck (Big Mike's Truck usually).
Last edited:
skwayb
NWSTP
Re: Tunerpro RT Build 5.00.2660.00
You need a newer build. The APU1 wasn't supported until Build 5.00.3609.00 (alpha) (6/4/09)
Implemented AutoProm passthrough mode for data acquisition (both 8192 and 160 baud GM apps). This is the last major v4 parity feature for v5. This means that v4 users who simultaneously datalog and emulate on the same port using an APU1 can now do the same at least as well in v5, and probably better.
The current build is 5.00.4000.00 (alpha) (7/3/09)
Mark just said he wasn't going to change the XDF or ADX format again so I should be ok to make them. So I will convert the current ones to TP5 format. But you will need the current build to use them. Don't ask me for it. I promised Mark I wouldn't give it out.
You need a newer build. The APU1 wasn't supported until Build 5.00.3609.00 (alpha) (6/4/09)
Implemented AutoProm passthrough mode for data acquisition (both 8192 and 160 baud GM apps). This is the last major v4 parity feature for v5. This means that v4 users who simultaneously datalog and emulate on the same port using an APU1 can now do the same at least as well in v5, and probably better.
The current build is 5.00.4000.00 (alpha) (7/3/09)
Mark just said he wasn't going to change the XDF or ADX format again so I should be ok to make them. So I will convert the current ones to TP5 format. But you will need the current build to use them. Don't ask me for it. I promised Mark I wouldn't give it out.