Transmission 4L80E

mrsyclone

8.76/161 mph AWD POWER
I'm thinkin about using a 4L80E in my Sy instead of the beaten up TH700... Is there anyone out there who has tried this with 4wd, and know which modifications I must make on my truck?

Where can I get info about this, and cost and so on..

Thanks in advance

Robert

http://www.syclone.org
robert@syclone.org
 

smeagol

Active member
Is anyone actually *running* one yet?

Ryan's isn't moving yet, Jerry McCoy has been waiting on a 4L80E from Hartman for like a year or so..

Not being a doubter, I just wanna hear people's results with the 4L80. I'm sold on it.
 

UNIsackV6

Member
On 2001-12-25 15:46, mrsyclone wrote:
I'm thinkin about using a 4L80E in my Sy instead of the beaten up TH700... Is there anyone out there who has tried this with 4wd, and know which modifications I must make on my truck?

Where can I get info about this, and cost and so on..

Thanks in advance

Robert

http://www.syclone.org
robert@syclone.org

You'll need to change the following:
1)Obvious is the unit itself, plus the computer.
2)Get an adapter made to mate your transfer case to the 4L80e
3)Shortened rear driveshaft.
4)Longer/stronger front propshaft
5)New 4L80e convertor.

If you want to search the web there is some stuff out there, I know Hughes Performance is big into them as I initially talked to them. Go here: http://www.hughesperformance.com/ Good luck and start saving now :wink:
 

ghettosled

SYTY SUPERSTORE
i know hartman charges around $3k for a basic 700r4, so I can only imagine what a built 4l80e with computer would cost. Last time I checked into it, the price was like $8k+
 

UNIsackV6

Member
On 2001-12-27 15:38, Christian Dionne wrote:
$8k? Anyone make an adaptor for a Liberty or Lenco to mate to our T-Case? Jeesh

Try Advanced Adapters they'll do whatever you want. I don't have their number off hand but ask a good trans shop they should know it. $8K is way high in my opinion for just a transmission, but depending on how wild you go I'd be willing to bet that a stock 4L80 will outlast even the strongest 700, but as far as real world AWD experience I don't think anyone really knows. If currently had a truck with a built motor and was tired of the 700 I'd get a freshly built 4L80e with the adapter to the stock xfer case and new driveshafts and see what happens. Most likely the stock xfer case will give out next which is why I went with the all gear one. The next 4 or 5 months will prove to me how strong the 4L80 is trust me....
 

V6 Kompressor

New member
The last time i checked into a stand alone controller for the 4l80e was about a $800 to $1000. From my experiences with the 4l80e transmissions on commercial vehicles, they suck.. I would rather have a t-400. You can check out the electronics at http://www.autotransinc.com. These guys also make the adaptor that splices into the speed sensor harness to calibrate your speedo for gear/tire changes. The last one I bought from them cost $150. The auto.trans. rebuilders associations website is http://www.atra-gears.com. if you need some trans. info.
 
G

Guest

Guest
i just sold an 4l80e because it was way to much work to put it in. they will handle 750ft.#'s of torque and up to 1000hp. summit and jegs make a control box that has 3 positions. street, strip, race. even tells how much hp. to rear wheels. last time i checked they were selling for $750.00. tran's run around $1000.00 good luck.
 

Brian Hartman

New member
The 4L80E's are very expensive to build up nicely. I've got a couple and one that I built for a list member was all out, killer everything, and it has taken almost 2 years to get all the parts made that were needed to make these things quick shifting, high performance trannies. I've been done with the tranny for over a year, as well. I had it ready to ship for about 20 months in case the customer wanted to bail on the custom 300M parts. He wants the best and is willing to wait. It finally happened right after X-mas. I received the parts and it will get to McCoy shortly. You can't even build a stocker 4L80E cheaply. Hughes has some stuff but shoot for a lower end market. I can do that too but it isn't a market that thrives for the best and drives innovation. If there is something I don't like, I change it. I don't just sit back and have a negative opinion that is founded on nothing but ignorance and laziness. Listen for it, you'll see it everywhere. Tells you a lot about a person. I only use the best parts available and if they aren't available, I have it made. I'm kind of in no man's land. I can tell you what, making high performance parts in a transmission is expensive and takes forever to do right. Sure you can do it cheaper but to do it right, it will cost. I go through all the hoops because these parts are needed and people are willing to buy them. These are the people that are willing to put themselves in uncharted waters for the benefit of others. I see these people getting flack all the time and not a lot of support from our list members or that is what is seems. I see the quieter people supporting others but they do it silently. I'd like to see more support for list members and list vendors from list members but I can't see it happening until the negative atmosphere dissipates. This doesn't have anything to do with who is right or wrong, just how it is dealt with.

I always warn my customers that the best will cost a lot but if the customers still want it, I do it or have it done. The 4L80E is a slow shifting behemoth that takes a lot of work and parts to make it into a true runner. The current trend is to get a stockish 4L80E and make it into a full manual-shifting tranny. It cloaks the major problem with these trannies. There are also a few Achilles heels in there that needs fixed or replaced with custom parts. Most people will not even know they are there because of their lack of traction but a strong SyTy can usually find them rather quickly. Since the Transmission industry is weird with weird people <and not very pleasant>, forging ahead is basically a solo project and is therefore slow. This holds true for many different transmission models. I have the best people in the industry helping me with things and it is still slow. The 4L80E is a killer tranny once you get it built right though.

I only sell the best computer on the market and it is a lot more expensive than the cheap hacks out there. Quality conscious people know things are expensive but buy it because it's the best. Sure, there is a mentality out there that will see a Ferrari and say they are too expensive and say it can be built a lot cheaper. Strange they should end up with a Chevette. Then they'll drive it around telling you it is just as good as a Ferrari. If you are a smart person, you can see it for what it is and know why a Ferrari is what it is. It isn't for everyone but only people that you'll hear saying that Ferraris suck, are people that don't have them and don't understand why they are what they are. If a person can't afford one of my products, I always try to help out in anyway I can. I tell them what their best options are and tell them how to achieve it within their means even if it isn't to any benefit to my own. I'm not an elitist. Heck, I am not in the elite category anyway and it doesn't help anybody.

If you have a situation that requires you to modify or change to a different model, there is a tranny out there for you. Some cost more than others. You just have to be realistic on what to expect. You can't buy the world for a dollar. Generally, you get what you pay for.

A 4L80E is killer once you get it built right but is expensive. This definitely is the top choice for most high HP applications.
A 400 is a lot cheaper but limits what you can do. If you adjust your application to mesh with it, it is very cool.
A Powerglide is a cool tranny but limits your application even more.
Our stock tranny is a great platform for us if you are willing to build it up to your trucks requirements.
A 4L60E is cool because you get most of the benefits of a regular 4L60 but you get to have a lot more control and flexibilty.
There are also aftermarket trannies that are available that might fit your application but generally they won't and are even more expensive than the previous options.

Sorry if I sounded like I was preaching. I hardly post in public because it is draining to see all the negative posts towards other people and I don't want it to happen to me. If someone is trying to make our trucks better, support them, don't try burning them at the stake. It is draining to put a whole lot of work into something then have someone poo poo it. Though they don't tell me directly, I usually get informed who is saying what and it makes you ask why are you even helping in the first place. I mean you pour all your energy into something and someone says something totally untrue or unfounded and it's like, "WHAT?" I'm not just talking about myself but I empathize with vendors or to other list members when I see it happen to them. I'm sure this post will provoke exactly what I avoid but it needs to be said.

Hope this helps…

Brian Hartman
HHP Racing
Transmissions and more.
 

ParTyBoy

New member
On 2002-01-21 00:05, Brian Hartman wrote:
The 4L80E's are very expensive to build up nicely. I've got a couple and one that I built for a list member was all out, killer everything, and it has taken almost 2 years to get all the parts made that were needed to make these things quick shifting, high performance trannies. I've been done with the tranny for over a year, as well. I had it ready to ship for about 20 months in case the customer wanted to bail on the custom 300M parts. He wants the best and is willing to wait. It finally happened right after X-mas. I received the parts and it will get to McCoy shortly. You can't even build a stocker 4L80E cheaply. Hughes has some stuff but shoot for a lower end market. I can do that too but it isn't a market that thrives for the best and drives innovation. If there is something I don't like, I change it. I don't just sit back and have a negative opinion that is founded on nothing but ignorance and laziness. Listen for it, you'll see it everywhere. Tells you a lot about a person. I only use the best parts available and if they aren't available, I have it made. I'm kind of in no man's land. I can tell you what, making high performance parts in a transmission is expensive and takes forever to do right. Sure you can do it cheaper but to do it right, it will cost. I go through all the hoops because these parts are needed and people are willing to buy them. These are the people that are willing to put themselves in uncharted waters for the benefit of others. I see these people getting flack all the time and not a lot of support from our list members or that is what is seems. I see the quieter people supporting others but they do it silently. I'd like to see more support for list members and list vendors from list members but I can't see it happening until the negative atmosphere dissipates. This doesn't have anything to do with who is right or wrong, just how it is dealt with.

I always warn my customers that the best will cost a lot but if the customers still want it, I do it or have it done. The 4L80E is a slow shifting behemoth that takes a lot of work and parts to make it into a true runner. The current trend is to get a stockish 4L80E and make it into a full manual-shifting tranny. It cloaks the major problem with these trannies. There are also a few Achilles heels in there that needs fixed or replaced with custom parts. Most people will not even know they are there because of their lack of traction but a strong SyTy can usually find them rather quickly. Since the Transmission industry is weird with weird people <and not very pleasant>, forging ahead is basically a solo project and is therefore slow. This holds true for many different transmission models. I have the best people in the industry helping me with things and it is still slow. The 4L80E is a killer tranny once you get it built right though.

I only sell the best computer on the market and it is a lot more expensive than the cheap hacks out there. Quality conscious people know things are expensive but buy it because it's the best. Sure, there is a mentality out there that will see a Ferrari and say they are too expensive and say it can be built a lot cheaper. Strange they should end up with a Chevette. Then they'll drive it around telling you it is just as good as a Ferrari. If you are a smart person, you can see it for what it is and know why a Ferrari is what it is. It isn't for everyone but only people that you'll hear saying that Ferraris suck, are people that don't have them and don't understand why they are what they are. If a person can't afford one of my products, I always try to help out in anyway I can. I tell them what their best options are and tell them how to achieve it within their means even if it isn't to any benefit to my own. I'm not an elitist. Heck, I am not in the elite category anyway and it doesn't help anybody.

If you have a situation that requires you to modify or change to a different model, there is a tranny out there for you. Some cost more than others. You just have to be realistic on what to expect. You can't buy the world for a dollar. Generally, you get what you pay for.

A 4L80E is killer once you get it built right but is expensive. This definitely is the top choice for most high HP applications.
A 400 is a lot cheaper but limits what you can do. If you adjust your application to mesh with it, it is very cool.
A Powerglide is a cool tranny but limits your application even more.
Our stock tranny is a great platform for us if you are willing to build it up to your trucks requirements.
A 4L60E is cool because you get most of the benefits of a regular 4L60 but you get to have a lot more control and flexibilty.
There are also aftermarket trannies that are available that might fit your application but generally they won't and are even more expensive than the previous options.

Sorry if I sounded like I was preaching. I hardly post in public because it is draining to see all the negative posts towards other people and I don't want it to happen to me. If someone is trying to make our trucks better, support them, don't try burning them at the stake. It is draining to put a whole lot of work into something then have someone poo poo it. Though they don't tell me directly, I usually get informed who is saying what and it makes you ask why are you even helping in the first place. I mean you pour all your energy into something and someone says something totally untrue or unfounded and it's like, "WHAT?" I'm not just talking about myself but I empathize with vendors or to other list members when I see it happen to them. I'm sure this post will provoke exactly what I avoid but it needs to be said.

Hope this helps…

Brian Hartman
HHP Racing
Transmissions and more.

Damn Brian.. I think that's the most I've ever seen you say at one time.. And I've been on the board/list for over 4 years...
haha.. thanks for joining in & especially for all of your hard work... there's a lot of behind the scene help that you take part in... Helped Hunter with his tranny and Pete/Nicki too.. Stay in there trooper, may need to call on you yet...

Jamie Lopez
Anchorage,Alaska
Sy #728

_________________
pic1.jpg

"You're your own juice factory."—Testimonial

<font size=-1>[ This Message was edited by: cHoCco on 2002-01-21 01:15 ]</font>
 

Brian Hartman

New member
See? That is what I'm talking about. I really appreciate that Jamie. That's what we need more of. That's the energy that will make everyone more successful. I'm not soliciting praise <I'll take it though :smile: > I'm just saying that having the people you are trying to help give their support and encouragement means a lot to the people that are working for our truck's success. It just feeds good energy to do even more to the benefit to everyone. I think our group was at its pinnacle right before the first SyTy Nat's back in the years '97-'98. There was a lot of synergy and since then, it has deteriorated quite a bit. Man, I don't know why I'm even talking like this. Maybe I'm willing to taking the risk in hopes of helping make everything better for all of us. It just feels like I'm on the fringes pleading to a group of people I care about to be more caring and careful. I think our list is just limping along. We should be a lot farther along with our truck's development. It seems that almost everyone that is forging new ground is doing it alone or is in an unfriendly competition with other list members. I know this isn't an absolute but it isn't like we have pride in making our trucks outrageously fast or anything. We are fast but not as efficient as the GN list. Look at their list and see the sense of community they have and they are supporting their mystique that every time you line up with a GN, you have your hands full. If I was one of those naysayers that think our trucks deserve no respect, I'd have no problem randomly picking out a Syclone or Typhoon, race it and win and with only a fairly quick vehicle. This confirms to him that the trucks are and always have been slow. Most of the trucks I see are far from being even near in tune. They are slow and run like crap. I think our list needs to project more pride and prestige. If you had a slow truck, you'd feel more of an obligation to be a good representative of our list and trucks. I think there have been a lot of people working on this and making good contributions but it just hasn't come together yet and our loyal support of each other is one of the keys to our success. So I guess it comes down to, and this is what I'm asking everyone to do or continue doing, is to ask yourself if what you are doing is helping or hurting our community and to choose the best road on which to travel. I know I'm exposed again but I'm just trying to help bring us closer together. We have everything to gain and everything to lose.

Hmmm, something about trannies to help justify this entry in the thread…

Get the largest trans cooler you can fit on your truck to cool the tranny. Get a deep pan and monitor your tranny's temperature. Use a red bottle of Lubeguard at every fluid change. Use a high quality ATF like Mobil 1, Redline, Royal Purple, etc. If you have a nice racing tranny built, you can try using Type F for crisper shifts. If you use Type F, change it every 7500 or less depending how hot you are running and how hard you are running your truck. If you do these things, you will reduce or delay your need to use my services. I like when people are working on their tranny by choice rather than out of need due to its self-destruction and demise.

Most of you already knew this but it doesn't hurt to remind everyone how to get the most with what they have.

Jamie, and everyone for that matter, give me a shout whenever you have a question about our trannies. I'll help any way I can.

Take care y'all
 

FLSY2730

New member
Brian, i am so pleased with the tranny i have now, thanks to your parts and tricks i cant stop laughing everytime i drive it now and the torque converter locks up. What a rush , its like having another gear.I would like to thank everybody that has helped me , hell i never even met these people and they helped me out.I can say that my truck would never even be close to done without this board. jack ostrander
 

Brian Hartman

New member
Hey buddy,

Hey buddy. It is good to hear from you. You are more than welcome bro. You can really save a lot of money building your own high performance transmission and it isn't really that hard if you have ALL the right parts and help from someone like me. It is gratifying as well. What a lot of people don't understand is that when you do a high performance build up like Jack's, it makes driving your vehicle a blast to drive. Usually driving an automatic really blows but if you build it up killer, you get instant response at the blip of the throttle and it shifts exactly when it should. You don't get that stupid, dead hump up dwell everyone is familiar with. How many of you are familiar to the likeness of this next scenario?

OK, you are in the middle lane on the 6 lane divided boulevard during rush hour and you are turning left into your favorite Mac's Steakhouse. You are sitting there waiting for an opening, any opening. Jeez. You keep seeing little ones that would be close but you aren't willing to risk it yet. Normally you would just gun it and make it with know problem but YOU know how our trucks are when you have a non-high performance transmission in them. OK, here comes your chance. A gap is coming. You even do a little brake boost but you still have to time the gap. You gun it before the opening knowing how to time the dreaded delay. The truck just barely rolls out and half-heartedly heads for the parking lot entrance. Oh man. Hurry up. Keep your foot in it if you want to make it. You are almost there…..And as you reach the unexpected Dukes of Hazard jump, um I mean entrance, your truck's turbo now kicks in and your tranny shifts to second. Your possessed truck decides to launch unabashed into the parking lot with hell's fury searching for hapless victims to mow down. You get the death clench pucker going as you roar in, standing on the brakes. Your wheels lock up in midair and everything goes silent. Everything is now in slow motion. …….. You see TERROR in the eyes of your devil truck's prey. There are kids, disembodied shoes, happy meals, bags, and purses flying everywhere. You land in a big cloud of dust, smoke and gravel and you hear screams, and curses from the agitated natives as you go skidding through their fast food paradise. Damn I hate that. Do you try to gracefully pull into the nearest parking spot during your "controlled" slide? Man, those brakes don't work very well when you are still in boost as you pull into your spot do they? :smile: (Shame on you if you know what I mean or should I say shame on me for know too) You now wonder what the lynch mob outside your, now sweet and innocent, truck do with a demon spawn in the likes of you. Hmmm, maybe you should just keep your momentum and just keep going, hoping your trucks dust and vapor trails totally obscure your license plate number from all your new found friends' views.

Now with a high performance build, you just stab the gas pedal and you dart across traffic so quickly, you have plenty of time to slow down to almost a stop to gracefully enter the parking lot. Yeah, you didn't realize the little Civic next to you is staging at the light and it launches on you BIGTIME leaving you at least a half a fender behind him. He looks to be pulling you hard to about half a car's length as you begin to push the gas a couple seconds after his amazing fast and furious launch. Time to put this rice dreamer to bed but since you didn't get to chance to do a proper brake boost, you have to only mildly obliterate him as your clunky transmission lazily shifts through the gears. With a properly build tranny, you can break loose your tires by just mashing the gas. You can even do this with a stock truck in proper tune.

The truck feels like a manual but with someone shifting for you. You don't get that mushy high stall feel from a high quality torque converter (like the 9/11) coupled with a really nice high performance transmission. The tranny shouldn't be just a mysterious box they you should just forget about as long as you can push the gas and go. There is a lot of performance to be gained from it and it allows the high performance of your engine to be fully realized and utilized.

Nice hearing from you again Jack and you are right, most of the SyTy owners are classy people that are a blast to be with.
 

Brian Hartman

New member
Paaattt. You are getting sleepy... sleeeeepy..... you are falling deeper into sleep..... There you are.....sitting in your truck.... Imagine yourself launching over and over...in and out of your garage....up and down your driveway...much to the delight of your neighbors.....everyone on your street is cheering you on...."Go on Pat", "launch it for us just one more time" they all cry....ABC Sports stops by to cover the exciting event....you are the most recognized man on Earth or that is what the latest copy of Cosmo is telling the ladies....all the girls start crowding the fence, yelling your name with love tears streaming down their faces...Hmmm, are you going to go for it?....Can you handle it?...drink a lot of water before you even attempt to sign autographs all over their shirts and bodies...what?..she wants you to sign where?...SWEEET :smile:

There. You are the man...on the count of three you'll wake up and order up your rebuild so you can get going with new career as the most famous tatoo artist ever, using willing naked bodies of the most beautiful girls in the world as your canvas..... 1...2.........3

I'll talk to you in a little while bro :smile:
 

Brian Hartman

New member
Ha! Hey Matt. You just wait. When I get your core and build it, the chicks will have to stand in line....though the line will be shorter since they will be standing in two lines and called two at a time :smile: ...or maybe more. How's it going for you? Good the last time I talked to you. Good enough to warrant three lines? :smile:

Just having fun with you bro..
 

SPiN

Member
On 2002-01-23 16:20, Brian Hartman wrote:
Ha! Hey Matt. You just wait. When I get your core and build it, the chicks will have to stand in line....though the line will be shorter since they will be standing in two lines and called two at a time :smile: ...or maybe more. How's it going for you? Good the last time I talked to you. Good enough to warrant three lines? :smile:

Things are going well. Keeping busy as heck. Rockford Racecraft should be dropping off the core when they drop off a customers truck they are finishing up that lives in CO. Things are progressing as always I guess.

oh yeah...well try three at a time...
 
Top