Sy 0005 on an internet site

K

KGB Pilot125

New member
here it is http://www.speedaddiction.com/march.htm

these are all at "my house" actually my roomates house but my mail is delivered there so :p

here is a video of me racing the T/A against the owner of the sites mustang.
http://www.speedaddiction.com/Videos/jvsws6.wmv



Joshsyclone2.jpg
 
SYO237

SYO237

SyTy Registry
josh..

could you do me a favor and take some pics of your exhaust setup?

i want to see how you routed it, because i am working on a side exit exhaust project that would be molded into the cladding....sort of like the rouch mustang look....

Thanks
 
K

KGB Pilot125

New member
SYO237 said:
josh..

could you do me a favor and take some pics of your exhaust setup?

i want to see how you routed it, because i am working on a side exit exhaust project that would be molded into the cladding....sort of like the rouch mustang look....

Thanks
Click to expand...

yeah not a problem, this is side exit Version 2, the first was 2.5 the a 3 inch tip on it, it was a little more angles and came out a little more flush than this one did. this is all 3 inch no tip, I am going to get it powdercoated black soon. I asked for it to look like hte mustang cobra R.
I think it pretty close.
 
S

sytyfreak

New member
Nice truck josh!

Hey anyone saw the vid??? I had problems... the download was really fasta and then when I was about to play it(WMP) it said something like "The specified stream type is not recognized" :-? ...
 
SYO237

SYO237

SyTy Registry
thanks josh..

my main deliema is to figure out a good way to route the exhaust without cutting the frame or going in between the frame and leaf pack....

and since im bringing it back a little farther than you and actually intergrating it to fit with the cladding.. i gotta do some homework and test fitting...

pics say a thousand words.
 
warmpancakes

warmpancakes

New member
im working on cutting a 4inch square hole through the frame and using a 4in boxed toube to connect the holes then run the pipe through it, it will actually be stronger then the factory, plus it gives me the cool racy look.
 
White97SVT

White97SVT

Member
Nice truck and vid. I like that side exit exhaust you have on it.
holy crap, did you read the build sheet on that mustang. Nice build, I wouldn't mind having that...
 
R

ron

New member
i am really curious as to what your friend(owner of the site) does for a living? cause I definately want to head that direction with my life...26 and owning/have owned all those cars has got to be ultimate living..
 
K

KGB Pilot125

New member
ron said:
i am really curious as to what your friend(owner of the site) does for a living? cause I definately want to head that direction with my life...26 and owning/have owned all those cars has got to be ultimate living..
Click to expand...

the owner of the site is here in town with his wife who is going to school. my roomate (the owner of the sweet cars) was a wife to a nuclear phycisist (sp) he passed away from a racing accident. the T/A was the grocery getter and the viper was her birthday present.
 
SYO237

SYO237

SyTy Registry
warmpancakes...

when you get to doing that, take pics of it would ya?


i really didnt want to cut into my frame, but if i had to, id want to do it cleanly and your method is pretty much what i was going to do also...
 
K

KGB Pilot125

New member
adam this weekend I will get the sy up on the lift and get ya some good pics. I might have to use the neighbors because the one at the house has a car on it but I will try and get it done for you.
 
You must log in or register to reply here.
Top