Stock on meth?

92TyLA

New member
im in the process of buying a meth kit and only reason is that i want to spank the crap out of a little sentra that bugs the hell out of me, His best time in the 1/8 is 8.09, my best was 8.60.

Think that once on meth my Ty should pull something around the 8 flats?,

so far I have RPM intake, tuned by RPM 8 months ago, NGk plugs, taylor wires, afpr, walbro 255, wired IC pump, egr delete, 3" exhaust and whit cat, and some minor stuff like vac lines and stuff but nothing as far as perfomance parts.

what would you guys recomend to make it faster now.

any input would be great
 

Beavis

Still plays with trucks
Re: Stock on meth?

Meth and retune will do it. If not happy then, more cfm turbo. :2cents:
 

sharkbait

New member
Re: Stock on meth?

Are you comparing 1/8mile time at the track? Cause a fwd sentra shouldn't hook the same on the street. Where as your awd would do waaaaaayyyy better from a dig on the street.
 

92TyLA

New member
Re: Stock on meth?

Are you comparing 1/8mile time at the track? Cause a fwd sentra shouldn't hook the same on the street. Where as your awd would do waaaaaayyyy better from a dig on the street.

yes on track, on street tires sentra pass is at 9.0 at best, on slicks and 0psi on tires he does the 8 flat, and i freakin hate his ass and he's always clowning on my beatiful truck:lol:,
i just want to shut his mouth once and for all.

thanks for any input
 

MySaudi

New member
Re: Stock on meth?

I have a Td06H-20g fs Direct bolt on.. if you get meth and a nice tune it should do some good.
 

It's just a six

Super Member
Re: Stock on meth?

If you can buy this cover for a semi stock or 20G look: http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=150582753053&ssPageName=STRK:MEWAX:IT
Note:Wastegate actuator bolts up different than a stock turbo. Need a different bracket to bolt up stock wastegate

This center section: http://cgi.ebay.com/ebaymotors/Turb...r_Truck_Parts_Accessories&hash=item2a0f4774f7

Then get your turbine housing (8CM) machined to fit the "H" turbine wheel or find a 10 ,12,CM housing.
Note: Stock 8 CM housing is restrictive,but with a larger "H" wheel installed,should flow some what better than a completely stock turbine wheel & turbine housing,but the exhaust is still choked @ the entry of the turbine wheel.

A 10 & 12 CM rturbine housings reguire machining to fit the "H" turbine wheel.
Will work w/stock 2100 stall converter.

The 14 CM housing will bolt right on the "H" turbine wheel, but will need a higher stall torque converter to get it to spool/boost decent form idle. Say 2400-2600 stall.

http://www.syty.net/forums/showthread.php?t=53545

http://www.syty.net/forums/showthread.php?t=79494

http://www.syty.net/forums/showthread.php?t=72424
 
Last edited:

92TyLA

New member
Re: Stock on meth?

If you can buy this cover for a semi stock or 20G look: http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=150582753053&ssPageName=STRK:MEWAX:IT
Note:Wastegate actuator bolts up different than a stock turbo. Need a different bracket to bolt up stock wastegate

This center section: http://cgi.ebay.com/ebaymotors/Turb...r_Truck_Parts_Accessories&hash=item2a0f4774f7

Then get your turbine housing (8CM) machined to fit the "H" turbine wheel or find a 10 ,12, 14 CM housing.
Note: Stock 8 CM housing is restrictive,but with a larger "H" wheel installed,should flow some what better than a completely stock turbine wheel & turbine housing,but the exhaust is still choked @ the entry of the turbine wheel.

A 10 & 12 CM rturbine housings reguire machining to fit the "H" turbine wheel.
Will work w/stock 2100 stall converter.

The 14 CM housing will bolt right on the "H" turbine wheel, but will need a higher stall torque converter to get it to spool/boost decent form idle. Say 2400-2600 stall.

http://www.syty.net/forums/showthread.php?t=53545

http://www.syty.net/forums/showthread.php?t=79494

http://www.syty.net/forums/showthread.php?t=72424


so basically what we are getting at is that the only way to go faster is bigger turbo right?:tup:
 

It's just a six

Super Member
Re: Stock on meth?

Nope
previous quote: "so peeps can stock turbo be upgraded or what?,

I thought I was answering that question?

Run more boost & alky injection will work for now.

Need to watch for knock .Keywords watch for, knock
 

Foot Performance

Donating Member
Re: Stock on meth?

so peeps can stock turbo be upgraded or what?,

I am running a Waller turbo I am a big fan of it turn around time is a little long he takes a stocker and makes it bigger and better

Run 12.5 stock engine and a very very mild tune


But yes watch for KNOCK I am running race gas just to make sure I don't damage my engine because I have had no time to tune it properly
 

BoostedSUV

Active member
Re: Stock on meth?

Man, if my truck couldn't beat a Nissan sentra 4 banger I would race it off a cliff. Lol that's embarrassing!
 

92TyLA

New member
Re: Stock on meth?

Man, if my truck couldn't beat a Nissan sentra 4 banger I would race it off a cliff. Lol that's embarrassing!

little crap has a nissan Pulsar engine on it and is running bigger injectors and bigger turbo headers, and some racing trans called lsd or something like that, not to mention he striped the crap out of the interior.......
 

BoostedSUV

Active member
Re: Stock on meth?

little crap has a nissan Pulsar engine on it and is running bigger injectors and bigger turbo headers, and some racing trans called lsd or something like that, not to mention he striped the crap out of the interior.......

You forgot to mention its 1500lbs lighter.... Put meth injection on the truck, turn up the boost what's for knock and kick his ass.
 

ziembic

Donating Member
Re: Stock on meth?

little crap has a nissan Pulsar engine on it and is running bigger injectors and bigger turbo headers, and some racing trans called lsd or something like that, not to mention he striped the crap out of the interior.......

It has a limited slip differential if you have the LSD letters right, which is like a posi rear. It means both drive tires are pulling rather than mostly to one side.
 
Top