SOLD-A1000, Filters @ Regulator

STOUT74

STOUT74

Member
A1000 Pump with 100 Micron Stainless Steel Element on the input side, & a 40 Micron Stainless Steel Element On the Output Side. Inlet is a 12 AN, Outlet a 10 AN. Comes mounted on a aluminum plate with rubber isolators, custom brackets for the fuel filters, & all the fittings, 1 10AN to 12AN, 3 10AN. The regulator is a 13101 A1000 Injected Bypass Regulator with fittings, 2 8AN in from rails, 1 6AN return. Asking $500, shipping included to lower 48.
 
Last edited:
0966Sy

0966Sy

Code what?
Re: A1000, Filters @ Regulator

Re: A1000, Filters @ Regulator

What kind of use has this been through, age?
 
STOUT74

STOUT74

Member
Re: A1000, Filters @ Regulator

Re: A1000, Filters @ Regulator

I've had this pump on my truck for about 4 years. My truck is rarely street driven, maybe a total of 500 miles since it's been installed, on & off the track combined. I had this pump fully rebuilt last year at Aeromotive, cost around $200. The reason for the rebuild was when I swapped over to E85, paper filters & E85 don't play well & the clogged the output filter causing too much head pressure, hense the 40 micron SS filter vs a 10 micron paper in the outlet filter. The only reason I'm selling this pump setup is I need a larger one, my new motor should be around 900+HP & this pump is right on the edge for the 120lb injectors I'm running, & defiantly not enough for the 225's down the road. Combine cost for all these parts is over $700, not including the custom billet filter brackets & plate. This fuel system works perfect & looks brand new.
 
UR50SLO

UR50SLO

V6+2=LSXCamaro
Re: A1000, Filters @ Regulator

Re: A1000, Filters @ Regulator

good price!

good luck with the sale!
 
You must log in or register to reply here.
Top