Power Steering Pressure Line

[Syclone1639]

Does anyone have any insight on changing the pressure line on the power steering pump? I just wanted to get anyones opinion before I attempt it this weekend. Looks like I have a pin hole in the hose itself. Why?

 

[MRKING]

Re: Power Steering Pressure Line

They've changed the parts number since i last messed with it all , swapping over to something like braided stainless is an option . There are more like it but this is the first that came up when looking . Its what I used for my hydroboost braided lines install .Easy to work with too.:tup:

Designed for high-performance brake and power steering applications, Powerflex Hose combines an inner PTFE resin liner with corrosion/abrasion-resistant stainless steel braid for maximum pressure up to 2500 psi.

http://www.jegs.com/p/Russell/Russell-Powerflex-Brake-Power-Steering-Hose/744528/10002/-1

 

[Throws]

Re: Power Steering Pressure Line

Easy swap. Just use a crows foot. Turn lock to lock a couple of times after you get it all back together to get the air out.

-P