Post a pic of your truck taken today
- Thread starter Jimmy
- Start date
- Status
QuinnSY
Donating Member
Re: Post a pic of your truck taken today
Looks Good! Do they make you add side markers over there?
Gave it a mini detail....
Looks Good! Do they make you add side markers over there?
Re: Post a pic of your truck taken today
Unfortunately yes. They're turn signals, as are the reverse lights at the rear. Any car built after '65 has to have orange turn signals as opposed to all red. It looks ok, I only gave it a quick detail - always more to be done!
Unfortunately yes. They're turn signals, as are the reverse lights at the rear. Any car built after '65 has to have orange turn signals as opposed to all red. It looks ok, I only gave it a quick detail - always more to be done!
92AcademyPhooner
New member
Re: Post a pic of your truck taken today
Just cleaned. But whats driving me nuts is that I can't find out how to properly get rid of my spoiler. Anyone know?
Just cleaned. But whats driving me nuts is that I can't find out how to properly get rid of my spoiler. Anyone know?
NCTyphoonKid
93 Ty #1710
Re: Post a pic of your truck taken today
Strykerblythe
Bowfishing King
Re: Post a pic of your truck taken today
Man it looks good back together good job
Man it looks good back together good job
atomicmecha
I hate rust
Re: Post a pic of your truck taken today
need the hinges for a non-spoiler rear window. I might still have mine from when I added the rear spoiler to my truck. I'll see if I still have them and let you know.
That's a fine looking truck. Hopefully mine will look this good someday. :tup:
need the hinges for a non-spoiler rear window. I might still have mine from when I added the rear spoiler to my truck. I'll see if I still have them and let you know.
That's a fine looking truck. Hopefully mine will look this good someday. :tup:
atomicmecha
I hate rust
Re: Post a pic of your truck taken today
Before and after shot of my front end rebuild part 1. New half shafts, propshaft, rotors, pads, hubs. And once I figure out how to get the swaybar back on, that counts as new as well. Also sanded all the rust (god bless a drill and a steel brush) and repainted everything with some heavy duty rust killer and under coating paint. God it's like night and day looking at it now. Gonna sand the rest of the frame and work my way to the back with this stuff.
Round 2 will be new a-arm bushings, upper and lower. New tie rods and sleeves, both inner and outer. Plus new pitman arm and idler arm.
Round 2.5 (or 3) will be a front diff cleaning and rebuild.
Then its on to the back end.
Before and after shot of my front end rebuild part 1. New half shafts, propshaft, rotors, pads, hubs. And once I figure out how to get the swaybar back on, that counts as new as well. Also sanded all the rust (god bless a drill and a steel brush) and repainted everything with some heavy duty rust killer and under coating paint. God it's like night and day looking at it now. Gonna sand the rest of the frame and work my way to the back with this stuff.
Round 2 will be new a-arm bushings, upper and lower. New tie rods and sleeves, both inner and outer. Plus new pitman arm and idler arm.
Round 2.5 (or 3) will be a front diff cleaning and rebuild.
Then its on to the back end.
1madgumby
New member
Re: Post a pic of your truck taken today
Awsome steve pretty cool
QUOTE=MICH TY;1037969]This morning I sat down to check my email, looked out my window into the backyard where I park the TYCLONE , and this is what I saw. Not the best pic, it was taken thru a dirty window and screen, but I thought it was cool( made me smile
), thought I'd share.
[/QUOTE]
Awsome steve pretty cool
QUOTE=MICH TY;1037969]This morning I sat down to check my email, looked out my window into the backyard where I park the TYCLONE , and this is what I saw. Not the best pic, it was taken thru a dirty window and screen, but I thought it was cool( made me smile
), thought I'd share.
[/QUOTE]
Sean Krupa
Moderator
Re: Post a pic of your truck taken today
Don W.
Stab it and steer it
Re: Post a pic of your truck taken today
Looks like crap but there's actual progress there. I've finally found a spot under the dash for the two "translators", if that's the right word, for the temp ga and the fuel pressure ga. The yellow wire if for an elec oil pres ga. Obviously not finished but I'm finally somewhat pleased with the under dash wiring.
Looks like crap but there's actual progress there. I've finally found a spot under the dash for the two "translators", if that's the right word, for the temp ga and the fuel pressure ga. The yellow wire if for an elec oil pres ga. Obviously not finished but I'm finally somewhat pleased with the under dash wiring.
graham1524
Well-known member
Re: Post a pic of your truck taken today
2500avalanche
Well-known member
Re: Post a pic of your truck taken today
What wheels are those?
What wheels are those?
graham1524
Well-known member
Re: Post a pic of your truck taken today
what translator are you using for the stock temp gauge? I was just going to use a secondary syty temp sensor and feed that to the cluster.
Looks like crap but there's actual progress there. I've finally found a spot under the dash for the two "translators", if that's the right word, for the temp ga and the fuel pressure ga. The yellow wire if for an elec oil pres ga. Obviously not finished but I'm finally somewhat pleased with the under dash wiring.
what translator are you using for the stock temp gauge? I was just going to use a secondary syty temp sensor and feed that to the cluster.
syclone0209
Member
Re: Post a pic of your truck taken today
Nice and clean..
[/URL][/IMG]
Nice and clean..
REVEREND HARMON
Party in a box!
Re: Post a pic of your truck taken today
- Status