Polishing

[spooldup]

Hi guys. I have spent mucho bucks on my polishing equipment and need to try to make something back and at the same time offer everyone good deals on having it done. If there is any interest let me know and we'll work it out.

 

[DanenGraham]

are you saying i send you something and you do the work.

If so what about wheels?

 

[spooldup]

Yes that's what i am saying. I will do the wheels for 50 a piece including caps of course. If you want the tear drop part of our wheels done let me know.

 

[warmpancakes]

how much to do about 12 feet of 3 inch aluminum pipe?

 

[Loeryder]

turbo compressor side only?
I already knocked it down but the casting marks run deeper than I expected.
Really just needs some fine in the recessed areas.

 

[spooldup]

how much to do about 12 feet of 3 inch aluminum pipe?

50 bucks ken

 

[spooldup]

turbo compressor side only?
I already knocked it down but the casting marks run deeper than I expected.
Really just needs some fine in the recessed areas.

That area is a tough one. Is this the stocker? 50 bucks.

 

[Ian Turgeon]

I know your not making me warn you about the subject line :banghead:

 

[Boostn]

what polishing equipments did u buy? I want to know how are u going to do it and with what equipments.

 

[warmpancakes]

can I get a address to ship it to? Ill have the tubes out early next week. Ken

 

[Loeryder]

Loeryder wrote:
turbo compressor side only?
I already knocked it down but the casting marks run deeper than I expected.
Really just needs some fine in the recessed areas.


That area is a tough one. Is this the stocker? 50 bucks.

It is a 20G compressor, very similar to a stocker but it has subtle differences.

Let me know how long you think it'd take, and I may be interested in sending it down to you.

 

[spooldup]

can I get a address to ship it to? Ill have the tubes out early next week. Ken

check you mail

 

[spooldup]

Loeryder wrote:
turbo compressor side only?
I already knocked it down but the casting marks run deeper than I expected.
Really just needs some fine in the recessed areas.


That area is a tough one. Is this the stocker? 50 bucks.

It is a 20G compressor, very similar to a stocker but it has subtle differences.

Let me know how long you think it'd take, and I may be interested in sending it down to you.

It should take no longer than 3 days. I'll email you.

 

[Boostn]

what polishing equipments did u buy? I want to know how are u going to do it and with what equipments.

can u answer my question please?

 

[spooldup]

what polishing equipments did u buy? I want to know how are u going to do it and with what equipments.

can u answer my question please?

That's like asking the guys who make chips how they do it. What kind of question is that? I have an ultimate and i don't ask mr. green for his notebook. People work hard and deserve the benefits of doing so. Please respect that and please don't take what i said the wrong way. Here's a pic of my t44 turbo that i just got done with if anyone wants pics of my work. It looks a little dull due to the clear paint i used on it as a clearcoat but you give a little take a little....

 

[GM TURBO]

Nice work.

I wish I had something to send.

 

[spooldup]

Thanks dave. It's nice to hear after you've busted your butt.

 

[Boostn]

hey, I am sorry if u thought I was intruding so bad. I was only asking what is your process of doing the work. Since I have been trying to do it myself. I have the bench buffer and bunch of polishing compounds and etc. But the way to do it right is with the process of doing it.

I just wanted to learn how to do it right so I can do it myself on bunch of parts I have, not just typhoon or syclone stuff. Whats wrong with helping people out to learn how to do it? I thought this is the forum for asking questions and providing valuable knowledge.

If u do provide some info, thank you, I really appreciate it.

 

[Falco]

That's like asking the guys who make chips how they do it. What kind of question is that?...

Actually, they do tell us what they've done... :roll:

Anyway, this thread belongs to the Classified IMHO.

Peace,

 

[93ty475]

what polishing equipments did u buy? I want to know how are u going to do it and with what equipments.

can u answer my question please?

That's like asking the guys who make chips how they do it. What kind of question is that? I have an ultimate and i don't ask mr. green for his notebook. People work hard and deserve the benefits of doing so. Please respect that and please don't take what i said the wrong way. Here's a pic of my t44 turbo that i just got done with if anyone wants pics of my work. It looks a little dull due to the clear paint i used on it as a clearcoat but you give a little take a little....

still have the picture? can you email it to me?


thanks,