Plug wires??

[92Tyx2]

Hello there! I have a big problem with my plug wires. I currently using MSD dist, ignition box, coil, and plug wires. For some reasons the wires always foul up after about a month or so. I also use ATR header on my Ty. The wire boots get discolor and real mushy too. Is there any prefer plug wire for the Sy/Ty with ATR header? Thanks for your time!!

 

[0966Sy]

I would try using some heat resistant meterial on the wires around the headers and keep em off the headers. Or you could try a wire with more resistance to heat. or try a wire that will withstand more heat.

 

[92Ty]

:x Well, that's what those MSD wires claimed, but I guess not enough.

 

[smeagol]

From what I've seen the MSD wires are not as heat resistant.. kinda what i've seen out of the Magnecor too (i'm not a fan of Magnecor at all).

I use Taylor almost exclusively on wires now. I've had a set of 409's on my Syclone for almost a year with headers on it, no sign of wear/tear/heat ssues. I have the fiberglass boots at the plug end, pretty much a necessity on the #1 plug.

 

[92Tyx2]

Thanks BG!!

Where can I find the Taylor wires?? I'm getting tire of these plug wires! I was gonna go with the Jacob wires with the ceramic boot, but Jeg don't have them also. Thanks again!!

 

[Loeryder]

www.Summitracing.com sells the taylor wires and also the taylor heat boots for the plug end.

Part #s at www.sytyauthority.net

With headers your gonna need some kind of heat wrap to save the wires.
I threw away some ceramic boot wires that were just wasted, even from the stock headers. I'd stay away from them.