need help with injector bung placement

[typhoon taggart]

Hey fellow members I need a little help wit the placement and angle of the injector bung placement as I'm working on trying to complete my fuel rail setup on my edelbrock 2114 intake manifold. Any pics would be greatly appreciated. Thanks Tag

 

[Houseofperformance]

Re: need help with injector bung placement

hope this helps a bit:









lower was converted by raceprovenmotors.

 

[Houseofperformance]

Re: need help with injector bung placement

they sit perfectly upright btw - not angled.

 

[typhoon taggart]

Re: need help with injector bung placement

thank you it helps a bunch

 

[nastety92]

Re: need help with injector bung placement

I also have a 2114 intake. Mine area also straight up and down. I don't have a good picture of the injector bungs but I can take some later on if needed. I think mine was the first 2114 to be running back in 2004-2005.

 

[typhoon taggart]

Re: need help with injector bung placement

that's what I have also is the 2114 I dropped off at the machine shop yesterday to have drilled then my buddy is going to tig in thanks again for info