Knock!! can someone take a look?

E

Eric Sy GN

Donating Member
Re: Knock!! can someone take a look?

It looks to me like it might be a tad lean at max boost. Also, the BLM's are on the high side, which means it's trying to correct a lean condition. You might try increasing fuel pressure 3-5psi and see what happens.
Since it looks like you're using a Velosyty chip, you can also try decreasing timing by a couple degrees (see chip instructions).
Regards,
Eric
 
Petesgn

Petesgn

Member
Re: Knock!! can someone take a look?

No problem , I'm going to try to go the meet tomorrow I'll take it with me , I have a fuel pres gauge also if you need to set your fuel press, you have a adjustable regulator on the TY ?
 
92TyLA

92TyLA

New member
Re: Knock!! can someone take a look?

meet is tomorrow?? I thought it was on saturday..
and yes it does have the AFPR

Thanks Pete
 
E

Eric Sy GN

Donating Member
Re: Knock!! can someone take a look?

You don't need the scanmaster to make the chip adjustments (if that's what you were thinking). You can use datamaster (or any scantool really).
 
92TyLA

92TyLA

New member
Re: Knock!! can someone take a look?

Eric Sy GN said:
You don't need the scanmaster to make the chip adjustments (if that's what you were thinking). You can use datamaster (or any scantool really).
Click to expand...

Nice, I thought I needed the scanmaster to do so, Im not good at all with these things,
thing is that i have no idea how to mess with datamaster, im barely able to datalog it.
Hope to get schooled this saturday and again thanks Erick for your help
 
WyoSyclone

WyoSyclone

Active member
Re: Knock!! can someone take a look?

Don't want to do a quick run around the block at 100% TPS until the engine is up to temp. Engine was only 153f during the full throttle portions. Let it get up to 165 or 170 then do your log.
 
92TyLA

92TyLA

New member
Re: Knock!! can someone take a look?

WyoSyclone said:
Don't want to do a quick run around the block at 100% TPS until the engine is up to temp. Engine was only 153f during the full throttle portions. Let it get up to 165 or 170 then do your log.
Click to expand...

Got it.
Thanks for the heads up!
 
You must log in or register to reply here.
Top