heres a few more install pics

cloneman315

cloneman315

Active member
http://img240.imageshack.us/my.php?image=dscn07430qk.jpg
in this pic notice the turbo oil filter from erue and noticeby the 6 cylinder the orange protective covering i covered both my starter wires all the way up so they dont burn.

http://img512.imageshack.us/my.php?image=dscn07424fv.jpg
overall ening pic
http://img240.imageshack.us/my.php?image=dscn07408zl.jpg
i wrapped the starter with heat wrap
http://img204.imageshack.us/my.php?image=dscn07385xk.jpg
mccoy fmic
http://img204.imageshack.us/my.php?image=dscn07373sg.jpg
front motor view notice mike lees ls1 ac delete also smaller pulley on alt from march to keep the juice flowing
http://img204.imageshack.us/my.php?image=dscn07367oe.jpg
msd digital 6 and remote oil filter with stainless braided lines
http://img204.imageshack.us/my.php?image=dscn07354aq.jpg
i ran my spark plug wires like they do on the big offshore boat motors under the headers and up the back no burnt wires there
http://img204.imageshack.us/my.php?image=dscn07349cj.jpg
14 inch and 10 inch fan with thermo switch when it hits 160 deg they come on and turn off any temp under also radiator out of 99 s10
http://img525.imageshack.us/my.php?image=dscn07325jc.jpg
pc68- battery mount notics the battery tray it is a 3 switch mount for a house wall lol
http://img525.imageshack.us/my.php?image=dscn07251zu.jpg
i fully restored this truck from frame up over last 3 years stripped it to bare metal and repainted all factory stickers bolts moldings etc
http://img525.imageshack.us/my.php?image=dscn07278iz.jpg
side motor pic
http://img525.imageshack.us/my.php?image=dscn07300bw.jpg
turbo time oil feed and oil adapter setup for an ,lines also u can see the wires running under the headers no burnt wires there
 
Last edited:
TurboJunk

TurboJunk

questionable
Re: heres a few more install pics

great progress and good to see that under the hood is done. good picture of the fans just what i needed to see now i know what to do with my truck. one fan was not doing the job. what did u do to block off the oil cooler? do u still get good deals on wide band o2?
 
cloneman315

cloneman315

Active member
Re: heres a few more install pics

i just left the plugs that came from the factory in the radiator,i should have more plx300 in a month or so
 
cloneman315

cloneman315

Active member
engine and trans etc installed and running

engine and trans etc installed and running

thnaks guys
 
Last edited:
You must log in or register to reply here.
Top