HELP! PANIC!!!! SHURFLO PUMP!!!!

[MjP]

hey i ordered a shurflo pump from campers choice (via sytyarchives.com) and i got this HUGE FUCKING PUMP BACK, WITH A LITTLE FUCKING 5/8 INLET AND OUTLET!!!!!!!

HELP........ this one has a part number of 2088-422-444


AHHHHHHH!!!!!! i don't wanna send back to AL

 

[4C FED]

Define huge.
How long & what's the diameter?
It is huge when compared to the stock pump.
5/8" sounds right, you just have to get 5/8 to 3/4 hose barb adpaters.

 

[JustBeachin]

Maybe you should have gotten the Jabsco.....stock size and it works in the stock location.

 

[Methuselah]

You got the right pump. It's "huge", but it works and is cheap compared to the Jabsco.
________
Best penny stocks

 

[manitoufs]

You got the right pump. It's "huge", but it works and is cheap compared to the Jabsco.

I guess that depends on how much you value your installation time.

 

[Methuselah]

I guess that depends on how much you value your installation time.

Well, if you're doing heater hose reroute at the same time...

http://www.sytyarchives.com/howto/viewarticle.php?article_name=ic_hose_and_pump.php&dir=engine
________
D PLATFORM (RWD)

 

[SY2932]

Yes, that is the correct part number for the Shur Flo pump for our trucks. Here's a link for a detailed "how to" so you know what you're in for... http://www.sytyarchives.com/howto/viewarticle.php?article_name=ic_hose_and_pump.php&dir=engine HTH's

Mike Campbell

 

[Captain Morgan]

Maybe you should have gotten the Jabsco.....stock size and it works in the stock location.

the shurflo mounts in the stock location too!

 

[Tydriver]

Sorry for the OFFTOPIC-ness of this post, but

RICK BRING BACK THE CHICK DANG-IT

Spidey just aint cutting it the way that other one was. !!!

 

[JustBeachin]

Maybe you should have gotten the Jabsco.....stock size and it works in the stock location.

the shurflo mounts in the stock location too!

$hit, that blocks almost half the CCHE's airflow.... :lol:

 

[Captain Morgan]

Maybe you should have gotten the Jabsco.....stock size and it works in the stock location.

the shurflo mounts in the stock location too!

$hit, that blocks almost half the CCHE's airflow.... :lol:

oh please, its not like its mounted in front. it gets plenty of air :roll: :roll: :roll:

 

[Blake]

Uh, Morgan, you're kidding right?
There goes my 2cents.
Blake

 

[E-Rue]

i hate air-to-water intercoolers!

kill them all!

e

 

[Blake]

"i hate air-to-water intercoolers!

kill them all! "

:lol: :lol: :lol:
Blake

 

[ed hess]

all right the babe is back!!!

Maybe we can get keith to put her up there in the advertising header and make it a continuous loop. lol

ed

 

[Tydriver]

all right the babe is back!!!

Maybe we can get keith to put her up there in the advertising header and make it a continuous loop. lol

ed

Ask and you shall receive !! Thanks rick !! Was going through withdrawals !