help oil line into top of turbo

1SLOSUV

New member
so i busted the oil line that goes into the top of the turbo how bad is this gonna be to replace whats involved. i am doing a pte51 swap and also need to know what to do with the coolant lines being as the new turbo has no spot of them. help help help
________
Ford Cargo
 
Last edited:

Don W.

Stab it and steer it
Re: help oil line into top of turbo

The coolant lines can be plugged and, I believe, the turbo oil feed line is available from LMC truck for one.
 

socalblue

New member
Re: help oil line into top of turbo

1SLOSUV said:
so i busted the oil line that goes into the top of the turbo how bad is this gonna be to replace whats involved. i am doing a pte51 swap and also need to know what to do with the coolant lines being as the new turbo has no spot of them. help help help

Get a new oil feed line from one of the vendors on this site, its probably better anyways to make sure your new turbo is getting sufficient oil. As for the coolant lines, if you aren't going to be needing them then just plug the ports up. Most aftermarket turbos don't require it I guess. To be on the safe side though, I think its recommended that you cool down your turbo before shuttting it off idle it a few min. or thru a turbo timer...which is more convenient
 

1SLOSUV

New member
Re: help oil line into top of turbo

well i need one like yesterday. i have a huge rod run next weekend and all thats holding me back is my downpipe which is in the mail and now a new oil feed line. def dont want to run it in the same location as stock that was a pain to get off. which vendor can get me one asap.
________
how to make a vaporizer
 
Last edited:

socalblue

New member
Re: help oil line into top of turbo

RPM Motorsports in CA and Turbotime are the ones I know of...they are in the marketplace section of the forum give them a call
 
Top