Help needed. AGAIN!!

Backzilla

Backzilla

New member
Trans brew, its probably almost 2 years ago now. didn't have the money to get a good rebuild but quickstop sourced one from the US when he was over there and brought it back. Had problems with the shop that fitted it but thats a whole other story.
Truck has been in storage over winter and was working fine. did all the checks and drove about 100 miles fine a month or so ago. not driven it since, took it out and it won't shift passed 2nd, all smooth then it sounds like its dropping into neutral or at least there is no drive. Ive checked the trans fluid which is only 300 miles or so old and its still as pink/red as fresh fluid. adjusted the TV cable but still the same. PLEASE PLEASE PLEASE tell me another tranny has gone on me. I've not boost launched or done anything stupid init so if it has, beats me how.

Any ideas guys cheers
 
overboostedtyphoon

overboostedtyphoon

New member
So if you put it in first will it engauge and then shift into second? Then when it trys to shift into 3rd it just free revs, also do you still have reverse? If you have reverse and 1 and 2 then either your 3-4 clutches are burnt up or the applying seal is hard from sitting or it has cracked or torn.

Sent from my SPH-D700 using Tapatalk 2
 
Backzilla

Backzilla

New member
Re: Help needed. AGAIN!!

overboostedtyphoon said:
So if you put it in first will it engauge and then shift into second? Then when it trys to shift into 3rd it just free revs, also do you still have reverse? If you have reverse and 1 and 2 then either your 3-4 clutches are burnt up or the applying seal is hard from sitting or it has cracked or torn.

Sent from my SPH-D700 using Tapatalk 2
Click to expand...


Yes i have 1 and 2 and reverse.
thanks for the reply
 
overboostedtyphoon

overboostedtyphoon

New member
No problem, so if you have 1 2 and reverse then the only place your problem lies is within the3 4 clutch pack.

Sent from my SPH-D700 using Tapatalk 2
 
Gnocide

Gnocide

turbo game burt reynolds
Re: Help needed. AGAIN!!

triple check your TV adjustment-that may be why it blew out 3&4-
happened to me and trans rebuild was inevitable

good luck
 
You must log in or register to reply here.
Top