Help!!! Need Quick Tourque Spec For Arp Studs

M

motorhead

New member
My engine builder forgot to put sealer on my head bolts,pushing coolant up the threads as soon as it developed pressure in the system.

Its got vortec heads and arp studs. the studs I know pretty much finger tight but whats the spec on the nuts? Ive got no paperwork,just a leaky engine.

Thanks will more than likely be up all nite AGAIN to fixy :rant:
 
M

motorhead

New member
Re: Help!!! Need Quick Tourque Spec For Arp Studs

bump.I guess Im at a stand still till I cant find a torque spec.for the arp's .not a drop of sealer on any stud.was starting to mix coolant with the engine oil with the ones leaking under the valve cover. I dont understand how this could be overlooked :rant:
 
M

motorhead

New member
Re: Help!!! Need Quick Tourque Spec For Arp Studs

thanks, I saw that page while hunting yesterday. I dont have any part #'s to cross ref and figure out what studs they are. All the info on everything used on this engine is many miles away.

There is 3 different length studs,if they were stock bolts they would all receive a different value,I assume this would still hold true if using studs??? just want to be sure. Thanks
 
0260IN3

0260IN3

Engine Builder
Re: Help!!! Need Quick Tourque Spec For Arp Studs

motorhead said:
thanks, I saw that page while hunting yesterday. I dont have any part #'s to cross ref and figure out what studs they are. All the info on everything used on this engine is many miles away.

There is 3 different length studs,if they were stock bolts they would all receive a different value,I assume this would still hold true if using studs??? just want to be sure. Thanks
Click to expand...

PM sent
 
You must log in or register to reply here.
Top