Got me a snake today!!

T-Bone

Active member
The paint shop painted my fiberglass cowl hood for the prototype Syclone but added a pearl metallic (which conflicts with the rest of my truck) so I was heading to their shop so they could see the contrast and repaint the hood. As I was cruising about 48 mph on the four lane by my house, up ahead a very clean white mustang cobra gets sideways while jumping on the four lane which caught my attention. I stepped it up to 55 in a 45 in hopes of catching a light near Krogers. No luck at the first light (stayed green) but the second was red with the fast lane occupied. He had the pole position in the slow lane so I just snuggled up behind him. Noticed he had street DR's on it with a custom exhaust and observing him a couple minuites prior, also knew he wasn't afraid to punch it. Light arrow goes green and he aggressively lurches out on 41A. Bad news for him is that I was ready and within 4 seconds, already passed him from behind and had put 3-4 car lengths on him. I slowed down to 40 and he just stayed about 6 lengths behind me and as I entered the center medium to turn L into the paint shop, he slows down to about 20, revs his car up going by me and popped the cluth, lighting up his tires and sliding L/R. I just grinned.....ignorance is bliss and I bet he is STILL trying to figure out how a small pickup walked the dog on him like that! He probably had to take a pill just to get to sleep tonight :).

The shop talked me into getting a complete repaint so I came home, removed all the cladding along with tailgate and grill and went back. That's the first kill in it (I just got it running right last month, thanks to Jeremy Duncan motivating me) but it is a blast and has gobs of power.....all on 16 lbs of boost. Don't wanna increase it until I put 116 in it but as is, it is plenty lethal and to walk a S/C, no doubt medded Cobra; like James Brown sings......I feel good!
 

jpalmer

New member
Re: Got me a snake today!!

Nice! I love mustang kills, they are as bad as the ricers sometimes. Glad to see your truck running well:tup:
 

Norm

Donating Member
Re: Got me a snake today!!

nice score. Keep tabs now, bet the wins out weight the loses.
 

TYTILIDIE

METH HEAD
Re: Got me a snake today!!

What all is done to your truck? Since everyone always hounds me Ill just say there is no way you could take an SC Cobra from a roll. Was this a Terminator?
 

T-Bone

Active member
Re: Got me a snake today!!

What all is done to your truck? Since everyone always hounds me Ill just say there is no way you could take an SC Cobra from a roll. Was this a Terminator?

Thanks Mike, for your confidence and support ;). Here's some details.....

Newer 2 bolt balance shaft block that has been bored .30 over.
Moldex billet even fire 3.50" stroke crank.
Cunningham 4340 Chromemoly 6" rods, stressed relieved.
Ross racing pistons, 8.5:1 compression, dished top configuration, .005 squish clearance. Swain-Tech coated
Total Seal zero-gap rings.
Comp-cam. Gross lift, intake .501 exhaust .501. Duration @.006 intake 271, exhaust 266. Valve timing @ .050 Intake open 4 btdc, close 39 atdc, exhaust open 41 bbdc, close 11 atdc. 112 degree intake center line, 114 lobe separation. Installed at 0 degrees advanced.
Comp-Cams stud mounted pro-magnum 1.6 roller rocker arms
Comp-Cams pro-magnum Hydraulic Roller lifters (vertical link bar)
BBC oil pump.
T-60 dual ball bearing turbo, small exhaust AR for fast spool up. 5lb of boost at 1600 RPMs. Never surges.
PLX wideband system.
Stainless ATR headers and 3" down pipe.
High-flow cat
ARP studs and bolts.
ATR stainless exhaust and muffler.
Distributor-less ignition. Waste-fire, runs off the stock Syclone code for ease of tuning.
Ported heads, maintains the swirl port and have been coated.
Large ATR intercooler.
ATR cold air box, ducted to 3" hole just below headlight.
50lb P and H injectors, ECU has been modified for injectors and has 6 spare high power drivers.
225 GPH fuel pump.
Hand built 700r4 transmission, still shifts crisp. Changed the fluid every 20K and has additional external filter and cooler.
2800 stall convertor
Larger Be-cool intercooler heat exchanger, has two 9" spa fans that come on anytime there is boost. Also has additional heat exchanger from A/C condenser. Intercooler water temp never 10 degrees above ambient.


No, this was NOT a terminator. It was a terminated :tup: 03/04 Cobra

Kinda hard to explain where I was. The 4 lane ends into another 4 lane and the only way both lanes can go is to the right. I spooled up to 8 lbs. simply because I knew he was gonna gun it since I rapidly pulled up to his rear and siezed the Baer brakes. It got his eyeballs to reflect from his rear view mirror so I was pretty sure he was gonna try and show off again. As soon as he nailed it, I reacted accordingly and drifted in the left lane since the lady in the left at the light was obviously going grocery shopping (we were both past her before she even started to move) and while he was shifting into 2nd, I was already near his front bumper. He might not have gotten a good shift :dunno: but it seemed as if I was slingshotted by him. The road cants downhill a tad bit when you turn onto it so he couldn't get full throttle or the car would have stepped out to the left but he learned one thing.....there is a torchfire red Syclone in Clarksville and a Cobra won't hurt it. Maybe he will confess what happened to friends and they will bring the Boa or Anaconda next time. I will soon have new rubber all the way around. What is on it now won't endure a 14 lb. or greater launch.....they just spin but 8-10 lbs. works great and I just let it build to 16-17 lbs. within milliseconds once I am under way. I do have to double side tape my dash cover though. Every time I take off hard, it ends up around my neck and chest.
 
Last edited:

turbodig

Active member
Re: Got me a snake today!!

Thanks Mike, for your confidence and support ;). Here's some details.....

Ross racing pistons, 8.5:1 compression, dished top configuration, .005 squish clearance. Swain-Tech coated

.005 Squish? Really? Or is that not taking the gasket into account?

I've seen some in the .025-.028 neighborhood, and thought that was tight...
 

T-Bone

Active member
Re: Got me a snake today!!

.005 Squish? Really? Or is that not taking the gasket into account?

I've seen some in the .025-.028 neighborhood, and thought that was tight...

Dig, that data doesn't include the gasket height. To produce maximum power, the intent was to use the least amount of fuel necessary while attempting to burn all of it. If the set-up would evenly mix the air and fuel into a homogenous mixture with an extremely fine mist of fuel, the increase in power would be achieved. The other option was to shave the heads (old school trick) to reduce the squish clearance at top dead center but Gordon thought it best to go this route. Everything seems to work harmoniously together since I put the custom chip in it and the power output has surprised me to be honest :tup:. My previous 2,700 mile built Sy I bought performed flawlessly (although, as Jimmy Mann said, it was an ATR catalog truck under the hood) and this one is as quick, if not more IMO. Gotta get it to the track to see for sure what it will do but it has me so tickled, I am unloading $4,000 into it for fresh paint. Should be home again next week.
 
Last edited:

T-Bone

Active member
Re: Got me a snake today!!

thats an impresive kill, those terminators are monsters

The guy driving was mid 30's. I thought he would take it all a bit more maturely and swing in behind me to chat for a minute. It was a clean car and I'm not hatin on mustang owners as I have a Saleen in my garage but yesterday was my day. 39 degrees and 3 miles from home. All the temps were optimum :).
 

Mtn Z

Donating Member
Re: Got me a snake today!!

Nice kill! Definitely a worthy opponent and you still terminated him. :lol:
 

blk00z28

Forced to by choice
Re: Got me a snake today!!

You never said what heads you have, just that they have been ported.. ?
 

JKsSyclone

Active member
Re: Got me a snake today!!

Good kill.

Back to the paint...
Is it red/red or back to the factory white/grey?
I vote white/grey.;)
 

turbodig

Active member
Re: Got me a snake today!!

Dig, that data doesn't include the gasket height. To produce maximum power, the intent was to use the least amount of fuel necessary while attempting to burn all of it. If the set-up would evenly mix the air and fuel into a homogenous mixture with an extremely fine mist of fuel, the increase in power would be achieved. The other option was to shave the heads (old school trick) to reduce the squish clearance at top dead center but Gordon thought it best to go this route.


Ok... that makes more sense. Depending on what you've got for gaskets, that'd put your total quench in the .030 -.040 neighborhood.

Shaving heads won't get you more squish, aside from the slight (and I mean slight) bump in pad area on the head itself. You either have to deck the block, have taller custom pistons, or get a very thin gasket.

I decked mine so the TRWs were flush in the hole, using the thicker stock head gaskets. This gave me around .040-.045

I'd really like to try some crazy quench stuff someday- half-dome pistons, that kind of thing.
 

turbodig

Active member
Re: Got me a snake today!!

T
Larger Be-cool intercooler heat exchanger, has two 9" spa fans that come on anytime there is boost. Also has additional heat exchanger from A/C condenser. Intercooler water temp never 10 degrees above ambient.

Curious... you mean the additional exchanger *is* the A/C condensor, or there's an additional one?
 

Norm

Donating Member
Re: Got me a snake today!!

What Gordon are you refering to? The one that owned the truck before you? Or another tuner? I hope it stays red,after all that is what helps make that thing abit more unique.
 

T-Bone

Active member
Re: Got me a snake today!!

What Gordon are you refering to? The one that owned the truck before you? Or another tuner? I hope it stays red,after all that is what helps make that thing abit more unique.

Yes, Gordon Jennings.
 

T-Bone

Active member
Re: Got me a snake today!!

Is it red/red or back to the factory white/grey?

Sorry to let you down but I am staying with the red/red. It looks too aggressive to turn back now, not to mention white is too hard to keep clean. Now that I got it running spot on, I am just gonna drive it and see how long it takes for the word to get out about it. I'm gonna show up at the big mustang club meet in my Saleen next weekend and ask if anybody knows about a flippin fast red S10 in Clarksville :). See what they have heard (if my Cobra guy spilled the beans).
 

T-Bone

Active member
Re: Got me a snake today!!

Curious... you mean the additional exchanger *is* the A/C condensor, or there's an additional one?

The fluid is plumbed throughout the right fender and an additional heat exchanger from a condensor which is housed behind it. It is a pretty ingenious set-up and runs super cool.
 

mrweelr

New member
Re: Got me a snake today!!

Nice kill :tup: Bout time someone posted in this section...it's been quiet lately.
 
Top