Gauge cluster bulbs

Damian

Member
Im wanting to do the LED bulbs in the gauge cluster since I cant see half of the cluster at night. Does anyone have the bulb numbers and how many we need to do the whole dash and center console? I searched and came up with 194 for the some of the gauge cluster bulbs but never an amount needed. I just put LEDs in my Jeep and now I have to finish the Ty.
 

Sean Krupa

Moderator
Re: Gauge cluster bulbs

Search and you shall be rewarded!;)

I believe I was one of the first ones to do the LED Conversion. I have all the part numbers and quanity in my build thread BTW.
 

Damian

Member
Re: Gauge cluster bulbs

Sean, I honestly searched for quite awhile and just came up with bulb number 194. I'll search for your thread on it here soon.

If I need the sockets fivetodrive, I'll pm you.

Thanks guys.
 

BoostedSUV

Active member
Re: Gauge cluster bulbs

I put LED 194s in my el Camino and I could dim them. They were either on or off. Not sure if there are dimable ones out there, it's been a while since I looked at them.
 

DanenGraham

Big in the rear
Re: Gauge cluster bulbs

This is what i used. Doesn't have the have the quantities, but shows what they look like. I went with a higher count of smd as i felt the others were not bright enough, and everyone says the dimmer should still work.

Also did the map lights on the visors and rear view mirror, but dont have them listed. If you are going to do the cluster, i would do them all. As the rest are easier to get to anyway.

EDIT: I got all mine off ebay except the courtesy light that has the strait and 360 leds. That was from superbright.


45f3f0d1-ae8b-49ac.jpg


Ok, left to right.

3led for HVAC, 28led for cluster, 20led for autometer & glove box(may do 28 for glovebox if it needs more light) 8led for shifter, 15led courtesy (9led strait, 6led 360*)

20
45f3f0d1-af1a-d348.jpg



28
45f3f0d1-af2c-d50a.jpg
 

fauXGT

Brick Pilot
Re: Gauge cluster bulbs

These are the ones I used. I left a couple of the red warning lights as incandescent because they bled out and made them look pink. Looking at the cluster schematic, they may be reverse voltage because they wouldn't light up at ignition but would after start. Can't remember now, but they are idiot lights anyway.
IMG_2419_zpsea5ee69b.jpg
 

fivetodrive

CRISPY
Re: Gauge cluster bulbs

I forgot to look at the cluster last night for the number you need, I have beeen getting ready to do this for crispy as well. Dont you have to keep the turn signal lights a regular bulb though?
 

Quickstop [UK]

Combating adversyty.
Re: Gauge cluster bulbs

Nope. Turn signal console lights are fine as LEDs. The actual turn signal lights need a resistor in parallel to not give the fault code.

I love mine.

As for being pink, you can buy red LEDs I think?
 
Top