I currently have 1 - 50# chip that I swap between trucks so no chip is available.what chip is in the ty
Good question. It would be a real pain to ship it but maybe $1500 + shipping. Its got a 150k on the stock bottom end with a 412 cam, new double roller timming chain, ac delete, 50# injectors. Trans I believe is an Art Car built trans, but I have no way to verify. Shifts just like a Ty trans should but I do have a weird problem where it locks and unlocks the TC while at highway speeds and that gets annoying. Haven't looked into fixing that yet.how much for complete engine and transmission ?
As stated above, the trans has the TC issue that needs fixed, but it still shifts pretty firm. The mileage is unknown though so I offer no guarantees with the trans. So with that said, if you picked them up with the wheels, $400 for trans, $175 for transfer case. Just FYI, the transfer case has a different output shaft than the Syclone, so if thats what you want it for, it won't work unless you swapped yolks out or the output shaft itself.trans and transfer how maney miles
I should have that. $10 plus shipping?What about the metal bracket for the #1 plug wire? My engine doesn't currently have it.
Its a pieced together 3". Not really worth selling.What exhaust is on the truck?
Sure can. They are a little sun fadded and on each one there is a very small nic on the side where the previous owner used a screwdriver to pry them off.could you send me pics of the ok ones, what is wrong with them?
Pretty much the entire interior is up for grabs yet. I quoted someone else $300 for the entire center console with linkage, so that might be sold, not sure. It has a Pioneer cd player in it, not the stocker. The ash tray I think was ok, $8 plus shipping? All the seats and interior panels are up for grabs yet.Let me know if thats the stock radio/cd player too...!
It has #50 injectors in it but I do have a set of #27 Bosch injectors That I took out of my Sy available. Prob around 50-60k on them. $100 shipped. The window trim is dry rotted, not worth selling. The air vents I gotta check the condition, but if they are good $10 + shipping.Could i get prices and condition of the following parts?
Inside and outside window strips.
Stock injectors
Driver and passenger air vents
Any mods parts?
I don't mind parting it out. And although it may not look like it from the posts, i'm confident it WILL pull more in parts than whole. I've gotten alot of pm's for parts as well so even if it takes a couple months, i'll have it all sold! (although you may see some liquidation prices towards the end! :lol: ) Like you said, just think of how much more yours is worth now! :tup:21 posts, and you've sold what? A lot of inquiries for $10 parts; your prices seem reasonable, but it looks like you'll end up with less than $3,000 for your trouble, IF you get 2K for the cladding, which may take awhile.
You sure it's worth the effort to part it, instead of just letting it go whole for 4K or so, and be done with it????
I think it's really easy to sell the bumpers, some engine parts, the cladding corners and rockers, and pocket a quick $1,500 or so. But then you'll have the rest left over, with very low interest. Problem is without the above parts, you no longer have a complete Typhoon to sell. Just a "parts car" taking up space.
And don't forget the hassle factor. It takes a ton of time to keep track of this, (21 posts on the first day, and what have you sold?) get the shit shipped out, and payment collected.
The low-interest that affects the price of the trucks also affects the price of the parts. I feel it's more cost-effective to sell the whole thing, than part it out. But keep parting these out. Makes mine worth more.:tup:
:2cents:
DaveP
Getting sold with the seats, sorry.Do you have the power seat assembly? Just the seat rails and motors, not the seat. Price?
haha, I appreciate it Gary! I have all the tools I need, just not alot of time. I'll hook you up with some deals though to save on shipping, get a list together!! :tup:brian its gary as im comming to pick up the tires and rims next week i was wondering since you are set on parting it out if you need help i can leave here early and help most of the day. let me know its no problem and if you need me to bring any tools.but i still want the whole thing.![]()
Exactly! Plus i'm gonna start saving for a GN/ T-Type to mess around with. I still have the Syclone so that aint going anywhere.I agree with the part out. not that I would do that but if your willing you can move all the parts over a period of time and have a constant inflo of project cash. rather than it sit in the drive for equally as long or longer! pics of door handle surounds?
$10 shipped for that power thingy.How much for the Power Junction Block on the firewall! The Post above the Distributor on the firewall.
Shipped to Toms River, NJ 08755
Thanks
Ralph
P.S. Payment == Paypal
![]()
I know how picky you are with stuff, and not sure you would be happy with the grill. Its all there intact, but there are a couple chips in the paint here and there. I have both sets of grill letters too, red or black. I'll take some pics tonight of whats pulled and get some prices up in the first post.Grille with letters attached? Shipped to 19002.
Sorry to see the truck go.![]()
I know how picky you are with stuff, t.
I think the grill is sold and will be delivered to Nats. I'll let you knopw if it falls thru.:rotf: Is it that obvious??
It wouldn't be for my truck (unless I absolutely needed it). I have other uses for it. Thanks.