Freaking transmission leak! Any suggestions?

Sean Lauver

New member
Re: Freaking transmission leak! Any suggestions?

I bought a Derale? Tranny pan and used the gasket it came with and had no problem. I was worried because everyone was complaining about leaking. No problem yet. I suggest using this pan from my experience.
 

hatrik8

Donating Member
Re: Freaking transmission leak! Any suggestions?

Sean Lauver said:
I bought a Derale? Tranny pan and used the gasket it came with and had no problem. I was worried because everyone was complaining about leaking. No problem yet. I suggest using this pan from my experience.

I originally was going to buy a derale pan with the cooling tubes, but then I heard they weren't as rigid as the aluminum pans like TCI. I'm kinda kicking myself now because I don't think many people have had leaking problems with the derale pan. :roll:
 

supersports10

New member
Re: Freaking transmission leak! Any suggestions?

take the mr gasket crap, and throw it out also, get a factory gm gasket from a dealer, and never have another problem.
 

hatrik8

Donating Member
Re: Freaking transmission leak! Any suggestions?

supersports10 said:
take the mr gasket crap, and throw it out also, get a factory gm gasket from a dealer, and never have another problem.

I checked a local dealer and he told me it was something like $75. Anyone have the pn for a factory GM gasket?
 

hatrik8

Donating Member
Re: Freaking transmission leak! Any suggestions?

DaveP said:
I assume this is a cast-aluminum pan. Perhaps it is slightly warped or bowed, causing the leak? Place it on a glass-top coffee table. (Maybe a neighbor has one, if you don't). Try to insert a piece of paper, or business card in the suspected leak area. It might also be 'twisted'. Try rocking it on the table.

I suggested the glass table, because I couldn't think of anything else that would provide a large enough flat surface.

Good thinking. It is cast aluminum. I will deinitely check to see if it's warped or bowed. I drained the fluid last night, and think maybe some of the bolts came a little loose. When I put it back on I will be using a little loctite and torque to spec in a criss cross pattern that is for sure.. Haven't seen much of a leak from the gasket area since I cleaned it off, but I haven't driven it either so that's really no good. It does however leak from the drain plug mostly so I've got it narrowed down.
 

NecroWolf

lost marbles member
Re: Freaking transmission leak! Any suggestions?

you know you generally have to retorque the pan bolts after it heat cycles a couple times
 
Top