FIRST 1/24 metal die cast Syclone!

[Sy644]

Keep in your mind it’s unfinished. Have to cutting and grind to make claddings fit. Also soldier to add some plastic. I’ll update occasionally on this project. The Syclone claddings, grill, rear bumper and wheels are from 1/24 Revell model kit.

btw diecast is a S10 1/25 with Syclone interior and engine.

 

[Sy644]

You guys can see wheels were stick out but I fixed it and narrow it. The wheels are spinning smooth plus steering too!

 

[SVO]

Nice, like the details. Needs a 500lb max sticker inside tailgate, lol……

 

[Thunder_Lloyd]

nice detail!

 

[Sy644]

Hopefully the glue will hold the cladding to bare metal body. I mask taped on door where cladding will be at. I’m testing it to see if works

 

[Sy644]

Nice, like the details. Needs a 500lb max sticker inside tailgate, lol……

Need somebody with decal printer so I can do it.

 

[Sy644]

I plan to paint very lightly gold on rear window. All decals. I cut the rear bumper off and going to glue it to Sy rear bumper too.

 

[Sy644]

Hmmm look like a real Syclone door….

 

[Sy644]

 

[Sy644]

I’m going to grind front bumper on sides to smooth so it will look right.

 

[Sy644]

Soooo hope that it hold together after 24 hrs!
It is a test

 

[Sy644]

Cladding stayed on the door! Whoooo!

front grill isn’t glue on yet, need to sand it little bit.

 

[Sy644]

 

[Sy644]

 

[Sy644]

Will have to weld plastic to add some missing spots because of 1/25 model kit and this die cast is 1/24

 

[Sy644]

Update! Welded passenger side claddings and fit so perfect!

 

[Sy644]

After done with plastic welds
I’ll sand it to smooth

 

[Sy644]

 

[Sy644]

 

[Sy644]