delete entirely
- Thread starter MRKING
- Start date
MRKING
New Parts for Old Trucks
Re: Syclone 309 v6 Motor parts Supersale
Re: Syclone 309 v6 Motor parts Supersale
yes sir . Also if you hook up the low level sender wire in the tank to the stock a/w intercooler plug and the low turbo light works on dash when alkys low .
Re: Syclone 309 v6 Motor parts Supersale
yes sir . Also if you hook up the low level sender wire in the tank to the stock a/w intercooler plug and the low turbo light works on dash when alkys low .
MRKING
New Parts for Old Trucks
Re: Syclone 309 v6 Motor parts Supersale
Re: Syclone 309 v6 Motor parts Supersale
I recieved a couple pm's that i still need to respond to but for now ,
Yes the 75s are low impedance and require a modded ecm to use . You can do a regular injector driver swap and run them saturated , or use a pek and hold type setup like i have . Either setup will work .The shortblock is still complete and i havent removed any parts or valvetrain if your interested in more than just the sb . Thanks .
Re: Syclone 309 v6 Motor parts Supersale
I recieved a couple pm's that i still need to respond to but for now ,
Yes the 75s are low impedance and require a modded ecm to use . You can do a regular injector driver swap and run them saturated , or use a pek and hold type setup like i have . Either setup will work .The shortblock is still complete and i havent removed any parts or valvetrain if your interested in more than just the sb . Thanks .
pontiacws699
New member
Re: Syclone 309 v6 Motor parts Supersale
Re: Syclone 309 v6 Motor parts Supersale
man, i could use those heads and intake.
Re: Syclone 309 v6 Motor parts Supersale
man, i could use those heads and intake.
smebyspeed
the old noob
Re: Syclone 309 v6 Motor parts Supersale
Re: Syclone 309 v6 Motor parts Supersale
pm sent
Re: Syclone 309 v6 Motor parts Supersale
pm sent
turbot
Member
Re: Syclone 309 v6 Motor parts *FREE SHIPPING*
Re: Syclone 309 v6 Motor parts *FREE SHIPPING*
That intake is it the Performer Vortec V6 #2114 and do you have any pics of the machine work and placement of the injectors. Thanks Erik
Ps I have ls stuff what are you looking for?
Re: Syclone 309 v6 Motor parts *FREE SHIPPING*
That intake is it the Performer Vortec V6 #2114 and do you have any pics of the machine work and placement of the injectors. Thanks Erik
Ps I have ls stuff what are you looking for?
Last edited:
MRKING
New Parts for Old Trucks
Re: Syclone 309 v6 Motor parts *FREE SHIPPING*
Re: Syclone 309 v6 Motor parts *FREE SHIPPING*
The intake and parts may be sold to tbone , he had contacted me about it prior but if he passes your more than welcome to it . I should be able to say today or tomarrow .
Yes it is the 2114 intake but im not sure if i have any pics of it before installation .It was drilled to accept a slightly reshaped stock fuel rail to keep it clean and simple .The rail has 6-an fittings screwed in . Its coming out this week and i will be taking plenty of pictures for my sale thread and new ls6 build thread .
Re: Syclone 309 v6 Motor parts *FREE SHIPPING*
The intake and parts may be sold to tbone , he had contacted me about it prior but if he passes your more than welcome to it . I should be able to say today or tomarrow .
Yes it is the 2114 intake but im not sure if i have any pics of it before installation .It was drilled to accept a slightly reshaped stock fuel rail to keep it clean and simple .The rail has 6-an fittings screwed in . Its coming out this week and i will be taking plenty of pictures for my sale thread and new ls6 build thread .
MRKING
New Parts for Old Trucks
Re: Syclone 309 v6 Motor parts *FREE SHIPPING*
Re: Syclone 309 v6 Motor parts *FREE SHIPPING*
the ostrich and g1 are sold . the ecm has had the injector drivers installed with some extra wiring to make them peak and hold vs the stock saturated setup . Thats done so low imp injectors can be used . These injectors and ecm make a great combo
Re: Syclone 309 v6 Motor parts *FREE SHIPPING*
the ostrich and g1 are sold . the ecm has had the injector drivers installed with some extra wiring to make them peak and hold vs the stock saturated setup . Thats done so low imp injectors can be used . These injectors and ecm make a great combo
smebyspeed
the old noob
Re: Syclone 309 v6 Motor parts *FREE SHIPPING*
Re: Syclone 309 v6 Motor parts *FREE SHIPPING*
any word on the cam yet?
Re: Syclone 309 v6 Motor parts *FREE SHIPPING*
any word on the cam yet?
MRKING
New Parts for Old Trucks
Re: Syclone 309 v6 Motor parts *FREE SHIPPING*
Re: Syclone 309 v6 Motor parts *FREE SHIPPING*
Sorry i do not have the shortblock removed yet . turbocwd wants to come by and look at it as soon as its out , you can def have it if he passes on it .
Thanks pat , i saw the payment .
Re: Syclone 309 v6 Motor parts *FREE SHIPPING*
Sorry i do not have the shortblock removed yet . turbocwd wants to come by and look at it as soon as its out , you can def have it if he passes on it .
Thanks pat , i saw the payment .