420
Broke Ass Racing
First up from the Monster is the bullet. This engine was built to run a 91mm turbo, and make in excess of 1300 hp reliably.
Engine specs are:
311 cubic inch V6
(This engine was originally built by John Waller. As the other two bowties that left his hands showed some issues, this engine was gone through thoroughly. Passed a leakdown and compression test, and we had both the heads and the pan off. No problems found. Finally, it was confirmed that there was a different machine shop that did the work to mine than to Jamie Hacking’s and the other motor Waller built.)
Bowtie block, sonic wall checked before being machined
Billet stroker crank
Oliver Billet rods
JE pistons, coated
King bearings
Billet roller cam
Parts cryo treated
23* bowtie heads
Jesel shaft mount rockers
Converted carb intake
Sheetmetal elbow
Sheetmetal valve covers
Stef's custom oilpan
Polished throttle body
Includes following accessories:
- Meziere 55gpm electric water pump
- Powermaster 150amp alternator
- Aerospace components vacuum pump (needs rebuild. Will include kit.)
- AC compressor
- Power steering pump
Billet pulley setup included.
Picture attached shortly. I can provider buyers with any pics or video they would like. Engine is still in the car, so buyer can hear / see it run.
***This engine cost 17K to build, intake to oilpan. That does not include the cost of accessories.***
ASKING 10K FIRM. Buyer to arrange and pay for shipping if necessary, as well as any fees (i.e. - Paypal).
Call or text with questions. (954) 410-5139
- Matt
Engine specs are:
311 cubic inch V6
(This engine was originally built by John Waller. As the other two bowties that left his hands showed some issues, this engine was gone through thoroughly. Passed a leakdown and compression test, and we had both the heads and the pan off. No problems found. Finally, it was confirmed that there was a different machine shop that did the work to mine than to Jamie Hacking’s and the other motor Waller built.)
Bowtie block, sonic wall checked before being machined
Billet stroker crank
Oliver Billet rods
JE pistons, coated
King bearings
Billet roller cam
Parts cryo treated
23* bowtie heads
Jesel shaft mount rockers
Converted carb intake
Sheetmetal elbow
Sheetmetal valve covers
Stef's custom oilpan
Polished throttle body
Includes following accessories:
- Meziere 55gpm electric water pump
- Powermaster 150amp alternator
- Aerospace components vacuum pump (needs rebuild. Will include kit.)
- AC compressor
- Power steering pump
Billet pulley setup included.
Picture attached shortly. I can provider buyers with any pics or video they would like. Engine is still in the car, so buyer can hear / see it run.
***This engine cost 17K to build, intake to oilpan. That does not include the cost of accessories.***
ASKING 10K FIRM. Buyer to arrange and pay for shipping if necessary, as well as any fees (i.e. - Paypal).
Call or text with questions. (954) 410-5139
- Matt
Last edited:
