Built engine, PT72 turbo, FAST XFI v2, stainless headers other stuff

V

Vasplieon

It runs; just not right!
Ok I have just dropped in an LS1 so I am selling all V6 parts

1. Engine, splayed miloden mains, vortech heads, JE pistons, Eagle rods, nitriled and cryo'ed crank shaft, ati balancer, mike lee intake set up, comp cam (think its a 415, but might be a 412). 3800.00 SOLD pending payment.
http://www.maconcountypublichealth.org/images/20131020_161226.jpg
http://www.maconcountypublichealth.org/images/20131020_161233.jpg
http://www.maconcountypublichealth.org/images/20131020_161242.jpg
http://www.maconcountypublichealth.org/images/20131020_161252.jpg

2. PT72 turbo 700.00 LOWERED Nobody??

http://www.maconcountypublichealth.org/images/20131014_132126.jpg
http://www.maconcountypublichealth.org/images/20131014_132136.jpg

3. Mike Lee vortech heads with large stainless Manley one piece 2.05/1.60, swirl polished, chrome stem valves, ported and polished (just took them to the shop and had them cleaned up and checked, no issued noted by Donnely automotive) springs also on there. They can accomodate either the standard intake or an edelbrock like on the engine. 1100 OBO LOWERED!

http://www.maconcountypublichealth.org/images/20131030_184904.jpg
http://www.maconcountypublichealth.org/images/20131030_185047.jpg

4. Mike Lee stainless steel single turbo headers 1200 OBO SOLD and delivered!

http://www.maconcountypublichealth.org/images/20131030_185210.jpg


5. FAST XFI 2.0 (had it updated for the 100 bucks awhile back) and harness 1300 OBO SOLD!

http://www.maconcountypublichealth.org/images/20131020_201004.jpg
http://www.maconcountypublichealth.org/images/20131020_201014.jpg

6. Air-to-air IC (old caleb guy from rockford build) from mccoy motorsports, sits in place of the stock turbo radiator 400 OBO (IC only) will look for piping and throw what I can find in, but no gaurantee SOLD!

http://www.maconcountypublichealth.org/images/20131030_185257.jpg

All this stuff has almost no time on it. I could never make the thing run correctly and finally decided to do a plug and play V8 build. All this stuff is roughly half price at the buy it now price. I would prefer for pick up on the engine, but will work with shipping if I absolutely have to.
 
Last edited:
V

Vasplieon

It runs; just not right!
Re: Built engine, PT72 turbo, FAST XFI v2, stainless headers other stuff

And yes that is a billet MSD distributor in the engine and it does come with it.
 
proptop

proptop

Donating Member
Re: Built engine, PT72 turbo, FAST XFI v2, stainless headers other stuff

Sir,
Can you PM me your phone number interested in some of your parts?
Bob
 
e95 Ty

e95 Ty

New member
Re: Built engine, PT72 turbo, FAST XFI v2, stainless headers other stuff

Since you have a separate listing for the RPM Vortecs, are the heads that come on the engine stock Vortecs?
 
V

Vasplieon

It runs; just not right!
Re: Built engine, PT72 turbo, FAST XFI v2, stainless headers other stuff

Headers and IC are sold

Yes the heads on the motor for 4k are stock vortechs....also it has stainless comp cam roller rockers....just remembered...
 
V

Vasplieon

It runs; just not right!
Re: Built engine, PT72 turbo, FAST XFI v2, stainless headers other stuff

All PM's replied to on the FAST and heads.
 
V

Vasplieon

It runs; just not right!
Re: Built engine, PT72 turbo, FAST XFI v2, stainless headers other stuff

The XFI is the 2.0 upgrade and it will come with the harness which does include the O2 sensor. Its the full kit.
 
V

Vasplieon

It runs; just not right!
Re: Built engine, PT72 turbo, FAST XFI v2, stainless headers other stuff

Multiple interest in the XFI unit. I do not think it will control a 4L80e on its own, but I do think FAST offers add on modules that will. First PM will get it.
 
T-Bone

T-Bone

Active member
Re: Built engine, PT72 turbo, FAST XFI v2, stainless headers other stuff

Would sure like to buy those valve covers and forward facing upper intake if you start parting the engine. Just send me a PM...cash ready to take flight :tup:
 
V

Vasplieon

It runs; just not right!
Re: Built engine, PT72 turbo, FAST XFI v2, stainless headers other stuff

If I start parting the engine I will consider that. I am contemplating a typhoon for it, but maybe just the shortblock. I do have extra injectors, roller rockers (gold cranes I think), a pertronix second strike ignition box, a MSD 6A box, another set of valve covers from RPM with filler cap (would need sanded and buffed as are in rough shape). I do think I have an extra BS3 harness as well. If any are interested LMK and ill try to send you a photo.
 
Sean Krupa

Sean Krupa

Moderator
Re: Built engine, PT72 turbo, FAST XFI v2, stainless headers other stuff

I'd be interested in the Polished Water Pump and Crank pulley if you don't need them.
 
Typhoon#747

Typhoon#747

Donating Member
Re: Built engine, PT72 turbo, FAST XFI v2, stainless headers other stuff

What injectors do you have for sale? Condition? Price?
 
T-Bone

T-Bone

Active member
Re: Built engine, PT72 turbo, FAST XFI v2, stainless headers other stuff

Vasplieon said:
I do have another set of valve covers from RPM with filler cap (would need sanded and buffed as are in rough shape).
Click to expand...

If they are top stud secured, please send me pics. I will buy them if they are not too rough :tup:
 
You must log in or register to reply here.
Top