Any line lock pics???

[autoaddictions]

Im looking for some line lock pics from other members that have done it. Im going to do front and rear line lock with Hurst roll control kits. Any good ideas welcome. Post up some pics. Thanks

 

[crazykaese]

Re: Any line lock pics???

Stop in at Ed Hess's shop - he has/had 4 wheel line locks on his truck before the current batch of upgrades started.

 

[Poconojoe]

Re: Any line lock pics???

I though 4 wheel line locks were not legal for most race classes

 

[qbnkiller]

Re: Any line lock pics???

I have them on mine, but no pics yet...

 

[1madgumby]

Re: Any line lock pics???

Use 2 line lock solenids, one for the front & one for the rear, brakes & wire them to one switch. Hope that helps.

 

[autoaddictions]

Re: Any line lock pics???

Use 2 line lock solenids, one for the front & one for the rear, brakes & wire them to one switch. Hope that helps.

I know how to plumb and wire the system. What im looking for is creative ways and places to mount the solenoids that minimizes snaking brake line all over the place.

 

[autoaddictions]

Re: Any line lock pics???

Stop in at Ed Hess's shop - he has/had 4 wheel line locks on his truck before the current batch of upgrades started.

Ed hess!! His truck in parked in the woods in hicksville never to be seen again right next to my twin turbo impala that was started 3 years ago.. But you already know that dont ya!

 

[REVEREND HARMON]

Re: Any line lock pics???

Engine bay is a little dirty but i plumbed mine in braided lines.

 

[JSM]

Re: Any line lock pics???

My front LL is mounted on the master cylinder via a bracket, rear is mounted inside the frame directly under the drivers seat which allowed me to run my adj. prop valve up and mount that on the seat so it can be adjusted in the cab.

NHRA tech only sees 1 that way also. LOL