aluminum drums

msheller

msheller

New member
one pair of aluminum drums for sale. 50$ plus ship(about 20$). Yes they r alot lighter and will reduce rotating weight. Yes they fit(adjust shoes out a bit), no you don't need to turn them--just hit with brass or steel brush or wheel on surface of insert. Call matt at 518 365-0387. Thanks.

Parts006.jpg
 
SergeAStorms

SergeAStorms

Bi-Phoon
Re: aluminum drums

BLAZER S10/JIMMY S15 83-84 aluminum

BONNEVILLE 80-81 9-1/2" dia, aluminum

BONNEVILLE 82-85 aluminum

CAMARO 82-92 drum, aluminum

CAPRICE 86-89 9-1/2" dia, aluminum

CATALINA 80-81 9-1/2" dia, aluminum

CENTURY 78-81 aluminum

CUSTOM CRUISER 85 9-1/2" dia, aluminum

CUTLASS 78-82 aluminum

EIGHTY EIGHT 80-85 9-1/2" dia, aluminum

ELECTRA 85 SW, 9-1/2" dia, aluminum

FIREBIRD 82-92 drum, aluminum

GRAND PRIX 78-85 aluminum

LE MANS 78-81 aluminum

LESABRE 80 Sdn, drum, 9-1/2" dia, aluminum

LESABRE 81-84 Sdn, 9-1/2" dia, aluminum

LESABRE 85 9-1/2" dia, aluminum

MALIBU 78-81 aluminum

MONTE CARLO 78-81 aluminum

PARISIENNE 80-81 9-1/2" dia, aluminum

PARISIENNE 86 9-1/2" dia, aluminum

REGAL 78-87 aluminum

RIVIERA 81-85 drum, drum only, aluminum

S10/S15/SONOMA 82-84 aluminum

SPRINT (GMC) 78-81 aluminum

These are all 9 1/2x2. Same as the Sy/Ty...However, I don't think Sy drums will interchange with Ty drums due to backing plate interference. At least that's what my Hollander says.
 
Syclone#2960

Syclone#2960

What ever it takes!!
Re: aluminum drums

On the 92 typhoon you will have to cut around the dust shield to fit. I used a pair of swiss tin cutters.
 
msheller

msheller

New member
Re: aluminum drums

Syclone#2960 said:
On the 92 typhoon you will have to cut around the dust shield to fit. I used a pair of swiss tin cutters.
Click to expand...

iNSTALLED a pair of aluminum drums on a ty today. The backing plate for the rear brakes has an extra piece spot welded around the outside to extend the shield diameter....it was easily removed with careful use of pry bars. no cutting needed and clean look when done

Matt
 
You must log in or register to reply here.
Top