air to air ?
- Thread starter 1b rock
- Start date
It's just a six
Super Member
autoaddictions
Active member
Re: air to air ?
That was cool!! Im a bit behind the times!!
That was cool!! Im a bit behind the times!!
berzerker
wookie
Re: air to air ?
just bustin your balls . Is this a stock turbo ? aftermarket turbo ? if stock leave the stock aftercooler set up and make sure the fluid pumping / routing system is running 100 % this will net you the best bang for your $ . The fast and by curious fmic will only get you gains when running a large cfm / boost capable turbo .
just bustin your balls . Is this a stock turbo ? aftermarket turbo ? if stock leave the stock aftercooler set up and make sure the fluid pumping / routing system is running 100 % this will net you the best bang for your $ . The fast and by curious fmic will only get you gains when running a large cfm / boost capable turbo .
Sean Donn
New member
Re: air to air ?
31x12x3 core from eBay. Get L brackets from home depot, cut and drill them to make fit. I used 2.5" piping (for space purposes near battery tray) and 90 degree 3"-2.5" silicon couplers. The truck pictured below has A/C
[https://picasaweb.google.com/m/zoom?uname=112889300525242363615&aid=5781139541170539921&id=5845986550443732098&viewportWidth=320&viewportHeight=416
31x12x3 core from eBay. Get L brackets from home depot, cut and drill them to make fit. I used 2.5" piping (for space purposes near battery tray) and 90 degree 3"-2.5" silicon couplers. The truck pictured below has A/C
[https://picasaweb.google.com/m/zoom?uname=112889300525242363615&aid=5781139541170539921&id=5845986550443732098&viewportWidth=320&viewportHeight=416
Re: air to air ?
precision 5758 turbo lunati custom grind cam roller rockers forged pistons hbeam rods internally balanced full headers 3" exhaust turbo tweak chip vortec head swap 2.02/1.60 4bolt splayed mains
and a 3200 vigalante
anything else about my build needed just spent a bunch on this truck due to a leaking stock intercooler so im not in any hurry to put it back on
ive done the search and google route but have not been answered as needed
any real help is appreciated thanks
precision 5758 turbo lunati custom grind cam roller rockers forged pistons hbeam rods internally balanced full headers 3" exhaust turbo tweak chip vortec head swap 2.02/1.60 4bolt splayed mains
and a 3200 vigalante
anything else about my build needed just spent a bunch on this truck due to a leaking stock intercooler so im not in any hurry to put it back on
ive done the search and google route but have not been answered as needed
any real help is appreciated thanks