? about Air to Air

[s10slamer]

what is the best way to keep the metal hose connected to the throttle body?

I hit 6 psi and the hose will blow off with a normal t clamp holding it down.

so my Question is do they make a clamp for that problem and where can I get one.

Thanks

 

[gmcturbo]

i would try to make a bracket. ive read posts about guys that have blown the stock intercooler off the throttle body if its not bolted down tight enough (or at all).

 

[TrboSy2051]

that or have a lip welded around the throttle body side of your pipe so the throttle body hose has something to clamp against (kinda like a flare) ...........HTH

Buddy

 

[ed hess]

that or have a lip welded around the throttle body side of your pipe so the throttle body hose has something to clamp against (kinda like a flare) ...........HTH

Buddy

i had a lip and it didnt work. then i had a bradcket that did work.

then we upgraded the a2a we were using and did the following at the same time.

i really gotta do a mount for the wbo2 box!

ed

 

[s10slamer]

how did you go about making that piece

 

[TYRODD]

that or have a lip welded around the throttle body side of your pipe so the throttle body hose has something to clamp against (kinda like a flare) ...........HTH

Buddy

i had a lip and it didnt work. then i had a bradcket that did work.

then we upgraded the a2a we were using and did the following at the same time.

i really gotta do a mount for the wbo2 box!

ed

Damn,...looks busy under there :wink: !

 

[ed hess]

how did you go about making that piece

keith made it along with the ic. piping, dp, and adapter.

ed