Search results

Re: My NATS thoughts We had a great time, even without the truck. Great weather, great location, great track, couldn't beat the hotel for the money. Hope it's closer to sea-level next time. TJ did a great job. Thanks Troy

I think we (the wife and I) are the first to arrive at the hotel. We got here about 1:45. I like the room. It's also a lot cheaper than the room we got in Colby KS. We also ran into some other members with their Syclone at the Comfort Inn. I left my Syclone home this year. See everyone...

Re: Does 0% TPS unlock the TC? If I remember correctly the TCC unlocks at anything below 3.4%. It sounds like you have a bad TPS to me.

Re: Rough Idle Cured When O2 Sensor Disconnected Check the fuel pressure & hook up a scanner the can display the fuel trims ( block learn & intagrator). Make sure your fuel pressure regulator diaphram is not bad, it will leak fuel into the vaccum line.

Re: Parts for sale /w *pics* Intercooler, turbo, wastegate ... I'll take the lower IC & fans. PM me.

Re: Parts for sale /w *pics* Intercooler, turbo, wastegate ... Interested.in Tony Dequick lower & fans. No leaks? Fans work?

Re: return home & the day after Re: return home & the day after The trip home went a lot faster the the trip out. We had several long trafic jams on the way out. Today I unloaded the Sy from the trailer & it fell. The passanger sided ramp fell after I backed the back wheels off onto the...

Re: Need help with a Diagnostic System, Monitor 4000E??? Re: Need help with a Diagnostic System, Monitor 4000E??? I used my 4000 yesterday. Try it in a differient car/truck. You may have trouble aldl port/ecu.

Re: Super Stock Thread! Last time I checked the rules, ported L35 heads are not legal for superstock.

Re: Super Stock Thread! My Syclone went 12.0 on a 20G with stock IC & DP. All you need to run solid 12s is a good TQ, an acly kit, upgraded fuel pump and a good tune. I've won this class many times & placed 2nd once, It's a great class.!!!

Where at in Oklahoma? I am in Bartlesville. Syclone is sitting under a blanket of snow and ice. Troy

I use 100% type F. No problem so far.

What are your plugs gaped at? Should be 033 to 035. Make sure your AFPR is not leaking, and try turning down your fuel pressure.

Falco, TRY THIS! Its only a test. Turn the fuel pressure way down, to about 35 psi base. Does it idle better. I bet it does. Your fuel tables are way to rich. I know that your WBO2 says it lean. I'll bet at it's so rich that it is fouling the plugs and the extra o2 in the exhaust is...

Falco, What is the value in your f28 table mine is .10 What___________________f30 table @ 800 rpm mine is 30.9 What___________________f29e 20 30 40 50 ________________________600 18.0 18.4 18.8 21.9 ________________________800 16.8 17.2 17.2 20.7...

I had the pleasure of racing a MB 500SL or something like that its been a few weeks. It was my first street race after moving to KC, about a week after the Nats. It was a little silver MB 500 something convertable, very nice car. There was an older couple in it with top down. I never...

Falco, I just tried to submit a long message but it didn't work, so this message is mostly is a test of the BB. What programing software R U using? Troy

A vaccum leak will cause the IAC counts to go low, but the MAP sensor will t tell ECM to add more fuel if you have a leak, remember we don't have mass air sensors. I have been chasing idle problems and I have just spent a large amount of time working on my idle fuel table. My truck idle great...

I have been doing a lot of tuneing at idle and at part throttle lately, and the first thing the comes to mind is that the block learn multiplier is going low at idle with the ac on and causing a lean condition when you step on it. I think this would only cause a stumble and not a long term loss...

I'm no A/C wizz, but from what I understand as log as the compressor keeps the liquid line full of liquid and the system is not over charged there should be very little to gain from a bigger bad a$$ compressor. You may want to try rerouting the heater core hoses in the summer, it is possable to...