Search results

Has anyone ever used the E3 spark plugs?

What is a good replacement hose (turbo to intercooler) for a stock truck

vin last 4 is 0364

Anybody know anything about this Syclone. Dealer said it was restored by someone on the Forum

This is a long shot. Probably 10+ years ago I sold a Syclone to a gentlemen in Canada. I am from Xenia Ohio. I have lost all documentation but was wondering what ever happened to it and where it is at.

What is the last 4 of the serial number

Re: Typhoon for trade It is red/red with roof rack. Email me and I will send a few pictures. thanks

Re: Typhoon for trade Generally No rust means No rust. Any other reference to rust (little, minor, 90% rust free, etc.) means you can pass a basketball through it. I have found through the years that the region of the US that a vehicle is advertised for sale does not mean rust or not. I have...

I have a 1992 red typhoon, stock with approx 67,000 miles. It is in Excellent condition, no rust. I am only interested in trading for a stock (very minor mods considered) syclone ONLY. I sold my syclone a few years ago and a syclone is my preference. Higher miles is OK but rust is not. Email...

:( Sy 0364 left today for a new home. I believe/hope it has gone to a good home. This is an all orginial low miles almost perfect example of show room condition. Still have the ty in the family and I still have my 87 S-10 with a sy engine in it and I still have my 96 Impala. Just needed to...

$1500 - $1800 probably a good range. I had a car shipped from Idaho to Ohio several months ago and it was $1400 for an inclosed trailer. I did a lot of price checking and talked to a lot of companies. Need to be sure they are reputable.

Look at the geometry of the valve train real close. Assuming there is plenty of clearance between the valve and piston on the intake and exhaust strokes then it is probably the valve train binding somewhere. If the adjustment is too tight normally it will hold the valve open all the time and...

thanks for the info

bump :D

The oil pan will drop right off if you pull the front diff which I have done and would rather do if changing the oil pan is the only thing I was doing. Don't get me wrong it's not easy pullin the diff either. :) :)

2wd has front coil springs and 4wd has torsion bars. Must have a 4wd frame for the front drive system to fit.

ctadams21: I did the search for the "engine parts interchangeability" and nothing came up. I even search all forums. No luck.

Has anyone changed the valve seals without removing the heads? I know of it being done on other vehicles but I was not sure on the SY/TY. Did you pressurize the cumbustion chamber to hold the valve in place??Which valve seal was used?? Thanks :) :) David

Jesse I don't know what is going on but I could not get to you web page using either address. I'll try again later.

Those examples may be too much. A little change to the Home Page would not hurt. I am content with what is here. I am not the one that has to make the changes though and what is here works ok for me. I guess if you want to make some changes it would be welcomed. :D