Search results

Re: Sputtering at WOT I'm thinking you ment gapped.....I beleive they were right, what should they be?

Re: Sputtering at WOT Hood 3 bar program with 3 bar map sensor. It ran perfect before. Clint

Re: Sputtering at WOT I used the MSD Cap & Rotor part number 5503 NGK UR6 Plugs Taylor 8mm Pro Series Spiro Pro Wires Clint

Re: Sputtering at WOT Detonation to me sounds like a lite pinging in the motor. Sounds and feels like a lite misfire and you can hear a sputtering? Not just 2-1 downshift WOT, but even off the line. Your thoughts? Clint

I have a sputtering at WOT. I just installed new: Cap Rotor Wires Plugs Dutchy Intercooler Underdrive Pulleys Johnson Coolant Pump & Gutted the Cat After install I get a sputtering at WOT, It does not feel like a misfire to me but… Idles fine and revs up fine, while driving it runs fine...

Re: What kind of catalytic converter to use Test Pipe or Hollow it out??

Re: Intercooler Wire......... Are you getting power to the IC pump? I just installed a Johnson pump (my pump was not coming on also...it was bad) and to send power to the pump without the truck running you put a paperclip in the top row, far right 2 terminals of your computer plug under the...

Re: WANTED: Test Pipe I know. After it drops off the home page, more people look in this section. Thanks:tup:

WANTED: Looking for a test pipe for stock exhaust. Let me know. Thanks, Clint Sy #577

Re: New Dutchty Intercooler Installed The cooler is larger (taller and thicker) then stock and getting the bolts lined up (head of bolt is on the inside and nut is on the outside) from the inside while keeping it tight. Being thicker it's held in by the front of the lower bracket and the back...

Just put it in yesterday then noticed pump not working (have another one coming). Truck is dirty and lower shield is still off for testing pump. Install was not easy, but its done. Installed new cap, rotor, wires, plugs, black boot protectors, 3 piece underdrive pulley set, serpentine belt...

Re: 3" Magnaflow muffler for sale Are you? Stop calling dibs only to back out time and time again. Ask questions, do your research, ask your wife and then call dibs and follow through with it.:dunno:

Re: Turbo not working Maybe check to see if your up pipe/tube has a leak or is off or maybe your wastgate is stuck open

Re: 3" Magnaflow muffler for sale There is Typhoon92 calling dibs only to back out......Again:roll:

Re: WTB LS1 or LS6 intake I have a LS1 Intake off my 1998 Camaro Z-28 with 30k. I upgraded to a LS6 intake long ago. Shoot me an offer and it's yours. Thanks, Clint Sy#577

Re: Tires for staggered rims http://www.1010tires.com/tiresizecalculator.asp Here is a tire calculator, that also give you suggested rim widths. Clint

Re: Guesses on ZZ4 Syclones 1/4 mile time? 355hp at the flywheel is going to be high 200's hp to the ground......and with 290hp +/- to the ground, it will be hard to get very far into the 13's.

Re: Tires for staggered rims I agree....if you jump to a 255 on both and keep everything else the same it will work upto a 10 inch rim. Measure your rim on the inside of the beed to make sure they are not 10 & 9...just incase.

Re: Tires for staggered rims Hello....He made you feel real welcome. Use 245/40/18-Rear & 245/45/17-Front. They are the same height so not to hurt anything (T-Case) and they are the same height as the factory size of 245/50/16 so not to mess us your speedo. Good Luck! Clint Sy#577

Re: Guesses on ZZ4 Syclones 1/4 mile time? Is it still AWD?