Search results

Re: Turbo rebuild...need manufacturers clearances FYI, I got word from Majestic Turbochargers that they allow for 0.002-0.003" clearance between the bushings. The bushing sleeve should be honed to smooth bore of sleeve.

Re: Turbo rebuild...need manufacturers clearances It could be the kit but it could also be wear on the mating surface to the bushings. I think there is a press-in brass sleeve. The two new bushings were within 0.0005" of each other and the inner diameter of the press-in sleeve where the...

Re: Turbo rebuild...need manufacturers clearances I have Garrett turbo for comparison and it is real tight. Definitely less play. I can machine another set of brass bushings with less tolerance if I only knew what is appropriate?

Howdy! I rebuilt my stock turbo with a kit from Majestic Turbo in Waco, TX. I assembled the turbo and there is still some amount of shaft play. I was hoping someone would know the tolerances needed for the brass bushings? I currently have 0.005". I'm guessing I need 1-2 thousands??? If there...

Re: WTB: Stock SYTY Engine I've got a pulled apart 4.3L with complete heads, block, rods, crank and pistons. It is bored .040. I got it with a purchase of my first Syclone a while back. Make me an offer and it is yours. Its just taking up shop space. I'm in Austin, TX.

Re: Whos got the Top Gear video with the Syclone in it???? I'd like to see the video too please? rampantwolf@yahoo.com

Thx for responding but I ended up bending my own.

Re: To carpet or NOT to carpet...that is the question??? Thx for the input so far. Is there anyone who is an original owner that remembers if they came with carpet or not?

I thought all Syclones came with a carpeted bed. Anyone know if the Syclone bed was indeed carpeted/covered from the factory. Was it an option or am I walking in mental circles? thx Markus

Re: WTB: light bezel for Syclone Tom, I wasn't able to find your PM so here is my email address: markus@WolfenTECH.com Best regards, Markus c. 512-944-3434

Re: turbo gaskets? I have a leak at the Oil Return Gasket and need to replace it. Do you know the thickness of this gasket or where I can find it? Best regards, Markus

Re: WTB Sy/Ty Dashboard Not to hijack your thread but I'm looking for the Syclone light bezel? Let me know if you come across one? Thx, Markus

Re: BOV,50's,Ext gates,Ultimate,Oil pan FS added parts Re: BOV,50's,Ext gates,Ultimate,Oil pan FS added parts I'm looking for stock hard fuel lines?

Re: Leftover parts for sale! LOWERED!! 20% OFF LISTED PRICE!! Do you have hard fuel lines available?

Re: Fuel pump problem Please Help! Here is some fuel pump info that you may find useful: The two black wires are ground wires which connect to the frame. The Gray wire goes to the Fuel Relay Bypass connector located on the upper firewall near the distributor cap. It is not under power unless...

Re: SyTy's suck Craiglook.com can no longer search craigslist :(

Looking for the stock version

Re: Fuel pump problem Please Help! I have a similar problem in my Syclone but I'm having a hard time finding a wire schematic/diagram. If anyone has a link to a wiring diagram please share with me? I have four wire coming out of the fuel pump (One gray, one purple, and two black). Only the...

Re: SyTy's suck This guy wants $8500 but did say that he drag raced it alot then rebuilt the engine. Unfortunately it developed a lower end knock after 500 miles :( http://cincinnati.craigslist.org/cto/2097011690.html Hope that helps. Markus

Re: SyTy's suck I did a quick search and found a Syclone for $6500 with a blown motor on Craigslist. I hope this helps. http://losangeles.craigslist.org/sfv/cto/2118175194.html Glad to have you along for the ride :)