Search results

Howdy, Since I'm running my new config with the PT52 my tranny/convereter (both stock) behaves differently. The tranny shift as it should be all the time, under part throttle and at WOT too. However almost every time I power braking the truck the converter will act up when it's locking up. It's...

Howdy, A question for anyone who is using the Ford fan. I know it came in two speed and one speed versions. I've a two speed from a 95' Taurus 3.8L. Obviously I don't need the two speed. My question, how do you wire the two speed? Do you solder them together and give the voltage for both speed...

Howdy, I'm thinking on a fuel system upgrade, which could serve a good build with around 750HP at the crank. I've searched around, but couldn't find any specific information. What kind of pump should I use? Aeromotive? Which model? On a side note, I guess -8 AN lines should be enough for such a...

Howdy, I'm just curious what's the reason between the different idle speed settings under load and not under load. The Ultimate came like this and would be nice to know the reason. With the 50's it's 800 at idle once warmed up and no load (in P). It's 700 under load. I guess it's because...

Howdy, I'd like to see DM logs, while the truck is ideling. I'm interested in configs with the 50's, 3 bar, open loop, stock motor, or at least stock cam and head (or L35's). If you have such a DM file pls send to me to falco@tragacs.com or post a link where I can download it from. TIA,

Howdy, If you remember I posted about my stalling problem at gear changes a little while ago. I still have this problem but beside this my idle went bad too. First it came occasionaly, usualy after longer trips. Now it's always there a few minutes after startup, once the coolant is around...

Howdy, My stock TB is leaking badly at the shaft's ends, so I wanna replace it. One question thought. Since BBK stopped the production of the SyTy type TB's (Summit has the twin 58mm on the web, but they can't tell you a shipping date), I've to go with the 89-92 L98 TB. I know about the...

Howdy, I've just received my new Raptor 9/12" converter and I've a few questions. First please help me to decide what to do. I'm still hesitating, wheter I want to install the converter and not touching the tranny or doing a tranny rebuild the same time. My tranny is acting normal, so there is...

George, Pls contact me. I sent you a couple of emails and PM lately... Later,

Howdy, I'm figthing against a stalling problem for a while now. It has became worse and worse, so I'd appreciate any idea to solve this... Let's see. Beside this stalling problem the truck performs very well. WOT performance is better than ever. It's running like a champ. Stalling happens when...

Have you seen this? http://www.turbobuick.com/forums/showthread.php?s=966b899821a5eea61c6f6e63eecffc85&threadid=85520 A few of you have obviously done... :wink: Later,

I've finished it, together with the 7/8" wheel cylinders install in the back... One remark here. These 7/8" cylinders are using a different thread for the bleeding valve... The stock won't work with them. Anyway new bleeding valves came with the cylinders, so no problem here. Back to the ABS...

... do I need to completely flush and refill the brake system? My new rear wheel cylinders arrived, so I'll start my brake refresh project. Will remove the ABS too. So, how much fluid should I buy to do this? TIA,

Howdy, Okay, I've this problem for a while and now I finally decided to cure this problem. When I power brake my truck, my rear wheels (at least the drivers' side fo sure) start to spin slowly while the truck is still sitting there. So I guess the front brakes hold the truck there. What can...

Howdy, I've finished my new electric fan installation approx. two weeks ago. I've already accomplished a little testing in the mean time, too. The fan is for a 95' Ford Taurus 3.8L, I got it brand new for $100. Previously I've used a much smaller fan from a VW, and I had cooling issues, not...

Howdy, I just realized that my rear brake cylinders are leaking, so I'm in a need to get new ones. However the two friends of mine, who usually ship over stuff for me are spending their holiday here in Hungary, so I can't ask them. Also my parts dealler here in Hungary went to a holiday too for...

I bought a stock used distributor from Ed a few weeks ago. Transaction went smooth and fast, item arrived as it should be and it was like a new one. I installed the dist yesterday, went to a test drive today. Wow. My ignition problems went away at once. No more hesitation under WOT, even my...

Approx two weeks ago I was legal street racing at a nearby airport... One of my runs was against a C5 (I don't know which year). It was stock but I belive he was running drag radials, at least he changed his tires in the lot. Anyway here is the video...

I'm slowly moving forward to remove my ABS. I've all the lines and tried to do a couple of flaring. So far so good. Now I have a few questions. What kinda brake fluid should I use? Keeping the DOT 3 or using DOT 5? What brand? I could also use some tips to flush and bleed the system. I've read...

I was just wandering under the truck today :roll: and realized, that I'm missing one of the starter bolts. Since I've not touched the started since I bought the truck I think it was lost by a previous owner. Unfortunately there were a reason they haven't put back that bolt (the one nearer to...